This post is more than 5 years old
50 Posts
0
652
snapclone and CPL
Hi experts,
Per snapview guides:"Clone private LUNs record information that identifies data chunks on the source LUN and clone LUN that have been modified after you
fractured the clone."
Now we suffered this problem: After fractured the CLONE,we power off the CLARiiON,and then power on,as well as performed a synchronization,the symptom show that it's a FULL-initial-copy!!
Why it is not INCREMENTAL copy ? What is the exact procedure if we need to restart the CLARiiON ??
Thanks!!
Per snapview guides:"Clone private LUNs record information that identifies data chunks on the source LUN and clone LUN that have been modified after you
fractured the clone."
Now we suffered this problem: After fractured the CLONE,we power off the CLARiiON,and then power on,as well as performed a synchronization,the symptom show that it's a FULL-initial-copy!!
Why it is not INCREMENTAL copy ? What is the exact procedure if we need to restart the CLARiiON ??
Thanks!!
RRR
2 Intern
2 Intern
•
5.7K Posts
0
November 14th, 2007 04:00
DGM3
238 Posts
0
November 13th, 2007 10:00
Regards,
DGM
RRR
2 Intern
2 Intern
•
5.7K Posts
0
November 14th, 2007 01:00
Chenxt
50 Posts
0
November 14th, 2007 02:00
Revision: 3.26.20.5.005
DGM3
238 Posts
0
November 14th, 2007 04:00
Support Solution emc173453 describes the behavior you are seeing.
You can review the Support Solution on Powerlink at;
Home > Support > Knowledgebase Search > Support Solutions Search
Regards,
DGM