when the data mover will fail over?

hardware error or panic - the exact conditions are described in the Configuring Standbys manual

Rainer

Where can I find the manual? Thank you.

on Powerlink - look at the announcement article on the top of the forum for the path

thank you. Will the data move failover when the I unplug the cge cable on the primary data mover?

network activity will not trigger failover

Per Primus emc21594

The following conditions WILL result in Data Mover failover if the Celerra has been properly configured:

• Failure of both internal Ethernets
  
• Data Mover internal Power failure 
  
• Manually failover with the server_standby command
  
• Data Mover panic
  
• Loss of SCSI connection
  
• Loss of Fibre connection
  
• Memory error
  

The following conditions WILL NOT result if Data Mover failover

• Halting of a Data Mover
  
• Manual reboot of the Data Mover 
  
• Loss of external NIC connection 
  
• Pulling Data Mover physically from slot or reseating Data Mover
  

If this message helped you, please make sure to rate it.

Thanks

- Sebby Robles