Unsolved
This post is more than 5 years old
19 Posts
0
187135
SC4020 Management network not responding
I've completed the initial configuration for both controllers through terminal/serial as outlined in the SC4020 setup guide. I've triple checked my networking settings and have verified the drops are working.
The net show command on both controllers show eth0 has a state of up and link of down. The duplex is shown as unknown. The link lights on the management ports on the back of both controllers are off.
What am I missing?
If I do a system show the management IP shows as 0.0.0.0. However, each controller has an IP/subnet/gateway/DNS and domain configured on eth0.
Thanks,
Cody
BVienneau
115 Posts
0
November 13th, 2014 08:00
Can you ping the eth0 IP addresses? if so, you should be able to open a browser and http:// to the first controller to start the setup wizard. You won't have a management IP (it's a VIP that moves between the two controllers) until you complete the setup wizard.
cpetry
19 Posts
0
November 13th, 2014 08:00
Um, no, I can' t ping them. That's why I posted on here. The link state is down and the link lights are off. I'm worried I have two faulty controller management ports on a brand new SC4020.
cpetry
19 Posts
1
November 13th, 2014 09:00
I figured it out. The Cisco switch was set to 100/full. That caused the issue. As soon as I put it on auto/auto the controllers management ports came online.
fmonroy
11 Posts
0
July 31st, 2015 12:00
where can I download that setup guide?
cpetry
19 Posts
0
July 31st, 2015 12:00
You can't.. I had to call and find someone willing to share it. It's the guide they give to their professional installers. They won't even sell a Compellent array without professional services. They will refuse to process the order. Did you not get a Dell installation tech to come out?
DELL-Daniel Ca
243 Posts
0
July 31st, 2015 13:00
Hey, guys.
I'm glad you got that figured out, cpetry. At the time of this initial posting there was nothing available, true, but since then, we have released this:
http://topics-cdn.dell.com/pdf/dell-compellent-sc4020_Owner's%20Manual_en-us.pdf
Which is an owner's manual that has some guidelines in it. Although, probably not as detailed as the guide someone luckily shared with you, but helpful none the less. :)
Hope that helps, fmonroy
Have a great weekend, gentlemen.
cpetry
19 Posts
1
July 31st, 2015 13:00
Yeah, I have an installation manual. It has a lot more information in it than that guide. The one I have covers using a serial connection to configure each controller for first time use.
wahab22
1 Rookie
1 Rookie
•
12 Posts
0
October 3rd, 2016 07:00
i cant discover may SC4020 with enterprise manager ....need help
and what is défault password ??