This post is more than 5 years old
3 Posts
0
1339
Firmware upgrade on DS16B2
I have two fabrics consisting of DS16B2 switches. I need to upgrade on these switches from v3.2.0 to v3.2.1b, and I have found a source for the firmware. My questions have to deal with interoperability between this firmware version, and firmware with another switch type (Brocade 4020) that is part of one of our fabrics, and the HBA's on our hosts.
Does anyone know of a link that would provide that information. I haven't found anything on Brocade's site.
Stuart
Does anyone know of a link that would provide that information. I haven't found anything on Brocade's site.
Stuart
JasonBailey
147 Posts
0
February 13th, 2007 15:00
http://www.emc.com/interoperability/matrices/EMCSupportMatrix.pdf
In the Feb ESM try page 3239, row 140. It looks like the Brocade 4020 is referred to as one of these:
IBM Brocade 10−port 4Gb SAN Switch Module for BladeCenter Servers (32R1813),
IBM Brocade 20−port 4Gb SAN Switch Module for BladeCenter Servers (32R1812),
IBM Brocade Enterprise SAN switch module (90P0165)
According to this page 3.2.1b is supported with IBM Blade switch firmware 5.0.3a & 5.0.5
Stuart5
3 Posts
0
February 14th, 2007 04:00
Thanks for the help. I believe this document will provide all the information I need.
Stuart
Stuart5
3 Posts
0
February 14th, 2007 05:00
Stuart
JasonBailey
147 Posts
0
February 14th, 2007 22:00
sysmgr1
128 Posts
0
February 19th, 2007 07:00