This post is more than 5 years old
148 Posts
0
1498
Question about the oversubscription in MDS 9513
Hi All,
below is the oversubscription output from our core switch MDS 9513.can somebody tell me what is the bandwidth means here ? is that bandwidth for each port group ?
| Module | Group | Ports | Bandwidth | InputRate | OutputRate |
| 1 | 1 | 1-3 | 1.200G | 39.704M | 129.312M |
| 1 | 2 | 4-6 | 1.200G | 10.759M | 5.193M |
| 1 | 3 | 7-9 | 1.200G | 4.043M | 7.345M |
| 1 | 4 | 10-12 | 1.200G | 30.899M | 49.555M |
| 1 | 5 | 13-15 | 1.200G | 10.444M | 2.604M |
| 1 | 6 | 16-18 | 1.200G | 372.241K | 153.036K |
| 1 | 7 | 19-21 | 1.200G | 86.144M | 33.525M |
| 1 | 8 | 22-24 | 1.200G | 41.922M | 126.678M |
healyj
141 Posts
0
December 12th, 2017 07:00
Hi there,
In our efforts to clean up the forum, we came across your question / statement.
If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered.
As for now we will set it to “answered.”
Regards,
Jim
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
May 24th, 2012 18:00
what command did you use to get this output ?
anoopcr
148 Posts
0
May 24th, 2012 19:00
I have taken this output from Cisco device manager.Right clicked a module and selected check oversubsciption
felipon1
96 Posts
1
May 25th, 2012 03:00
Hi,
Don't really know where does that Bandwith number comes from, but I can confirm that a Gen-3 port module has a 12.8Gbps Bandwith per Port group.
rgds
RRR
2 Intern
2 Intern
•
5.7K Posts
0
June 19th, 2012 02:00
I think it was something like 60Gb per blade when using a modular switch, right?