Unsolved
This post is more than 5 years old
2 Posts
0
52857
Reconstruction after Syswipe...
hello,
Is there any possibility to restore or reconstruct array configuration after using syswipe on MD3000i?
thanks I.
Unsolved
This post is more than 5 years old
2 Posts
0
52857
hello,
Is there any possibility to restore or reconstruct array configuration after using syswipe on MD3000i?
thanks I.
Top
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
November 10th, 2015 06:00
Hello Pumrat,
Once you do a syswipe on an MD3xxx system you are not able to recover the array configuration. When a syswipe is issued it writes 1 & 0 over every MB of space & destroying all previous configurations. The only way to try to recover the array is to take the drives to a software recovery company & they may be able to recover the array
Please let us know if you have any other questions.
Pumrat
2 Posts
0
November 10th, 2015 22:00
hello,
two years ago a repaired Promise array with damaged DDF stuctures, so I hope it will be the same.
I have another question... is "set diskGroup [diskGroupNumber] addPhysicalDisks=(trayID1,slotID1
... trayIDn,slotIDn) raidLevel= ...." from SMCli un-destructive for data?
thanks
I.