Unsolved
This post is more than 5 years old
3 Posts
0
55252
Dell inspiron 620 and Ivy Bridge CPU's
Dear all, can someone tell me if my Dell inspiron 620 will support the new Ivy Bridge CPU's?. I know the chipset (Intel H61 Express) will suport the new CPUs but I guess dell will have to provide a bios update as these new CPUs use less power?.
Thanks,
Charlie
speedstep
9 Legend
9 Legend
•
47K Posts
0
March 19th, 2012 08:00
Only if they update the Bios for the new Microcode.
or 2 × PCIe 2.0 ×8
or 2 × PCIe 2.0 ×8
charlielondon
3 Posts
0
March 19th, 2012 09:00
Hi, thanks for the reply. Do Dell generally update the BIOS in these situations or not please?
speedstep
9 Legend
9 Legend
•
47K Posts
0
March 19th, 2012 10:00
Depends. In the case of the 620 I would say its likely because its still current. Once the system becomes
End of life the likely outcome is No more bios updates. Current bios is A04.
Requires the INTEL MANAGEMENT ENGINE to be installed.
If you run the Bios update and it says ME not found you know what the issue is.
System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000001A: SANDYBRIDGE Q0 M12206A7_0000001A: ================================================= BIOS Version: A04 Release Date: 2011/11/21 VBIOS: 2102 PSA Version: PSA4214 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-A04.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xD25E Dword checksum: 0x2BF5D25E CRC-32: 0x7FFAE1CA Input filename: MS-A04.exe Word checksum: 0x5813 Dword checksum: 0x1FFE5813 CRC-32: 0xF512D8A3 Input filename: BIOS-A04.ROM (system BIOS only) Word checksum: 0x4CEA Dword checksum: 0x182F4CEA CRC-32: 0x4DFC01F4 Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. X23 turn to A04. Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000001A: SANDYBRIDGE Q0 M12206A7_0000001A: ================================================= BIOS Version: X23 Release Date: 2011/11/18 VBIOS: 2102 PSA Version: PSA4214 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X23.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x7DAF Dword checksum: 0x2BF77DAF CRC-32: 0x97E9BC39 Input filename: MS-X23.exe Word checksum: 0xEEFD Dword checksum: 0x2000EEFD CRC-32: 0x9A10D243 Input filename: BIOS-X23.ROM (system BIOS only) Word checksum: 0xF83B Dword checksum: 0x1830F83B CRC-32: 0xA5EF5C07 Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. Close DSW. 02. LAN power control by wake on lan item and LAN controller item. Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000001A: SANDYBRIDGE Q0 M12206A7_0000001A: ================================================= BIOS Version: A03 Release Date: 2011/09/29 VBIOS: 2102 PSA Version: PSA4214 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-A03.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x72B6 Dword checksum: 0x2BF872B6 CRC-32: 0xED0882D2 Input filename: MS-A03.exe Word checksum: 0xF804 Dword checksum: 0x1FFFF804 CRC-32: 0x820EE547 Input filename: BIOS-A03.ROM (system BIOS only) Word checksum: 0xED42 Dword checksum: 0x1831ED42 CRC-32: 0xDF0E62EC Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. X22 turn to A03. Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000001A: SANDYBRIDGE Q0 M12206A7_0000001A: ================================================= BIOS Version: X22 Release Date: 2011/09/23 VBIOS: 2102 PSA Version: PSA4214 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X22.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xDDC1 Dword checksum: 0x2BF6DDC1 CRC-32: 0x4FE5D495 Input filename: MS-X22.exe Word checksum: 0x27A0 Dword checksum: 0x1FFF27A0 CRC-32: 0xB2388011 Input filename: BIOS-X22.ROM (system BIOS only) Word checksum: 0x584D Dword checksum: 0x1830584D CRC-32: 0x7DE334AB Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. Update A4214A0 ePSA ROM to correct (DF466316 Title: Mission Hills BIOS does not support ePSA Event Tab). 02. Set the methods of LNKA ~LNKH from NotSerialized to Serialized (A method that is serialized cannot be reentered by additional threads.) to correct FIDA imageinstall issue in factory sometimes. Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000001A: SANDYBRIDGE Q0 M12206A7_0000001A: ================================================= BIOS Version: A02 Release Date: 2011/07/27 VBIOS: 2102 PSA Version: PSA4212 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-A02.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x4561 Dword checksum: 0x2BFC4561 CRC-32: 0xBA78908C Input filename: MS-A02.exe Word checksum: 0xDE5C Dword checksum: 0x1FFCDE5C CRC-32: 0xBA7134ED Input filename: BIOS-A02.ROM (system BIOS only) Word checksum: 0xBFED Dword checksum: 0x1835BFED CRC-32: 0x887E70B2 Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. X21 turn to A02 Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000001A: SANDYBRIDGE Q0 M12206A7_0000001A: ================================================= BIOS Version: X21 Release Date: 2011/07/07 VBIOS: 2102 PSA Version: PSA4212 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X21.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x670A Dword checksum: 0x2BFB670A CRC-32: 0xFF695E83 Input filename: MS-X21.exe Word checksum: 0x79B2 Dword checksum: 0x1FFD79B2 CRC-32: 0xB9B280D4 Input filename: BIOS-X21.ROM (system BIOS only) Word checksum: 0xE196 Dword checksum: 0x1834E196 CRC-32: 0xCD6FBEBD Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. SANDYBRIDGE D2 AND Q0 M12206A7_00000018 -> SANDYBRIDGE D2 AND Q0 M12206A7_0000001A Notes ------------------ 01. MicroCode update is for G440 S3/S4 resume fail. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000018: ================================================= BIOS Version: A01 Release Date: 2011/06/15 VBIOS: 2102 PSA Version: PSA4212 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-A01.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x8C30 Dword checksum: 0x2BFA8C30 CRC-32: 0xA6E3A3DC Input filename: MS-A01.exe Word checksum: 0xB738 Dword checksum: 0x1FFCB738 CRC-32: 0xEDF32646 Input filename: BIOS-A01.ROM (system BIOS only) Word checksum: 0x06BC Dword checksum: 0x183406BC CRC-32: 0x94E543E2 Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. X20 turn to A01. Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000018: ================================================= BIOS Version: X20 Release Date: 2011/06/10 VBIOS: 2102 PSA Version: PSA4212 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X20.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x81B8 Dword checksum: 0x2BFA81B8 CRC-32: 0x23BAFC84 Input filename: MS-X20.exe Word checksum: 0xA61B Dword checksum: 0x1FFAA61B CRC-32: 0xC111BAF4 Input filename: BIOS-X20.ROM (system BIOS only) Word checksum: 0xFC44 Dword checksum: 0x1833FC44 CRC-32: 0x11BC1CBA Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. "Intel(R) Sandy Bridge D2 and Q0" M12206A7_00000014.PDB -> M12206A7_00000018.PDB 02. Adjust fan curves to cover the sustaining addition CPUs Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X19 Release Date: 2011/05/21 VBIOS: 2102 PSA Version: PSA4212 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X19.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x8E3B Dword checksum: 0x2BFE8E3B CRC-32: 0xC98E8CD6 Input filename: MS-X19.exe Word checksum: 0x0B0F Dword checksum: 0x1FF80B0F CRC-32: 0x5DD118DB Input filename: BIOS-X19.ROM (system BIOS only) Word checksum: 0x08C7 Dword checksum: 0x183808C7 CRC-32: 0xFB886CE8 Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. IRQ re-assign. Notes ------------------ 1. IRQ assignment X00 BIOS A00 BIOS X19 BIOS IRQ IRQ IRQ IGD B B B LAN B B B SATA0 B B 5 SATA1 B B 5 EHCI0 7 7 7 EHCI1 B B A Audio A A 5 SMBUS A A 7 ME B B A SLOT1/PEG B B B SLOT2 5 5 A SLOT3 A A 7 SLOT4 B B 5 =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X18 Release Date: 2011/05/19 VBIOS: 2102 PSA Version: PSA4212 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X18.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x0C08 Dword checksum: 0x2BFE0C08 CRC-32: 0x80772E53 Input filename: MS-X18.exe Word checksum: 0x1E46 Dword checksum: 0x1FF91E46 CRC-32: 0xA844E6F5 Input filename: BIOS-X18.ROM (system BIOS only) Word checksum: 0x8694 Dword checksum: 0x18378694 CRC-32: 0xB271CE6D Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. Modify VBIOS setting : [Integrated DisplayPort with HDMI/DVI compatitable] to [Integrated HDMI/DVI] 02. Modify VBIOS setting : [Hot Plug Support in BIOS] from Enable to Disable 03. ePSA PSA4209 -> PSA4212 : [Audio cable detect] Required to Optional Notes ------------------ 1. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X17 Release Date: 2011/05/05 VBIOS: 2102 PSA Version: PSA4209 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X17.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x70AF Dword checksum: 0x2C0A70AF CRC-32: 0xB82F4F23 Input filename: MS-X17.exe Word checksum: 0x0EA5 Dword checksum: 0x1FF50EA5 CRC-32: 0x60E86EFE Input filename: BIOS-X17.ROM (system BIOS only) Word checksum: 0xEB3B Dword checksum: 0x1843EB3B CRC-32: 0x8A29AF1D Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. System shows RTC failure message in "Normal mode" because BIOS don¡¦t clear RTC failure flag in "Manufactory Mode". 02. ME will keep failing after flashing BIOS without changing ME jumper to correct direction on next boot. Notes ------------------ 1. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: A00 Release Date: 2011/04/12 VBIOS: 2102 PSA Version: PSA4209 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-A00.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x37BD Dword checksum: 0x2C0A37BD CRC-32: 0x4B2A4D27 Input filename: MS-A00.exe Word checksum: 0x5884 Dword checksum: 0x1FF15884 CRC-32: 0x768D076E Input filename: BIOS-A00.ROM (system BIOS only) Word checksum: 0xB249 Dword checksum: 0x1843B249 CRC-32: 0x792CAD19 Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. Support "Get Number of Valid Samples" and "Get Number of Sampling Intervals" for fan testing. Notes ------------------ 1. Changing BIOS Version from X16 to A00. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.2.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X16 Release Date: 2011/04/07 VBIOS: 2102 PSA Version: PSA4209 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X16.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xBA90 Dword checksum: 0x2C09BA90 CRC-32: 0x0491E554 Input filename: MS-X16.exe Word checksum: 0x4033 Dword checksum: 0x1FF24033 CRC-32: 0x719FE84E Input filename: BIOS-X16.ROM (system BIOS only) Word checksum: 0x351C Dword checksum: 0x1843351C CRC-32: 0x3697056A Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. Notes ------------------ 1. [Module Update Synchronizing with AMI]Intel SandyBridge 4.6.4_Intel_SNB_040 2. Update new graphics for wrong VGA port. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.2.0 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X15 Release Date: 2011/03/31 VBIOS: 2102 PSA Version: PSA4209 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X15.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xB1C2 Dword checksum: 0x2C7BB1C2 CRC-32: 0xBF2117E1 Input filename: MS-X15.exe Word checksum: 0x8D63 Dword checksum: 0x1F798D63 CRC-32: 0xD46B58AD Input filename: BIOS-X15.ROM (system BIOS only) Word checksum: 0x2C4E Dword checksum: 0x18B52C4E CRC-32: 0x8D27F7DF Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. DF464052 : Four USB ports is failure in system with USB card reader during posting. 02. DF464038 : "WOL from S4/S5" item can editable during admin password locked status. Notes ------------------ 1. [Module Update Synchronizing with AMI]Intel Chipset Reference Board-SugarBay 4.6.4.0_VEB_1AOQI017. 2. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_040. 3. [Module Update Synchronizing with AMI]Intel SandyBridge 4.6.4_Intel_SNB_037 =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X14 Release Date: 2011/03/17 VBIOS: 2102 PSA Version: PSA4209 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X14.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x314E Dword checksum: 0x2C7E314E CRC-32: 0x4CFEB364 Input filename: MS-X14.exe Word checksum: 0xAA49 Dword checksum: 0x1F7BAA49 CRC-32: 0x5C564BC7 Input filename: BIOS-X14.ROM (system BIOS only) Word checksum: 0xABDA Dword checksum: 0x18B7ABDA CRC-32: 0x7EF8535A Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. DF447530 : Cables test failed in ePSA testing. 02. Modify MH/SG(MT/ST) HWM settings. 03. The system can't always enter "HDD protecting" as attached PS/2 keyboard. 04. Modified fan duty and tolerant based on value which come from thermal team. 05. The system can't enter ePSA as "HDD protecting" item Enable. Notes ------------------ 1. Update EPSA 4208 TO EPSA 4209. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X13 Release Date: 2011/03/10 VBIOS: 2102 PSA Version: PSA4208 ME FW: 1065 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X13.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x579F Dword checksum: 0x2C83579F CRC-32: 0x763F99F1 Input filename: MS-X13.exe Word checksum: 0xD91F Dword checksum: 0x1F76D91F CRC-32: 0xBA83A68A Input filename: BIOS-X13.ROM (system BIOS only) Word checksum: 0xD22B Dword checksum: 0x18BCD22B CRC-32: 0x443979CF Input filename: ME1065.bin (ME FW only, for FITC and FPT) Word checksum: 0x5EF1 Dword checksum: 0x13975EF1 CRC-32: 0x91809BE9 Input filename: 1065upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x4FC9 Dword checksum: 0x104A4FC9 CRC-32: 0x08FDCFCC Fixes/Enhancements ------------------ 01. Added USB card reader VID/PID. Notes ------------------ 1. Update ME firmware from 7.0.10.1203 to 7.1.10.1065. 2. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_039. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X12 Release Date: 2011/03/03 VBIOS: 2102 PSA Version: PSA4208 ME FW: 1203 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X12.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x24BD Dword checksum: 0x2D3A24BD CRC-32: 0x1564B050 Input filename: MS-X12.exe Word checksum: 0xCA1B Dword checksum: 0x1E07CA1B CRC-32: 0xE75A18E7 Input filename: BIOS-X12.ROM (system BIOS only) Word checksum: 0xD835 Dword checksum: 0x18BCD835 CRC-32: 0xAC541387 Input filename: ME1203.bin (ME FW only, for FITC and FPT) Word checksum: 0x2605 Dword checksum: 0x144E2605 CRC-32: 0x21DD1C54 Input filename: 1203upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x177D Dword checksum: 0x1101177D CRC-32: 0xBB604E66 Fixes/Enhancements ------------------ 01. DF456569 MS: WPE BiosLoadDefault.exe tool hangs. 02. DF456214 MS: nVidia GTS420 (M207 test) hangs on Missionhills and Sawgrass. Notes ------------------ 1. Update ME firmware from 1197 to 1203. 2. Add cmpmever.exe in "Tools for Manufacturing\MECMP" folder. 3. Add MEver.txt in "Tools for Manufacturing" folder. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X11 Release Date: 2011/02/24 VBIOS: 2102 PSA Version: PSA4208 ME FW: 1197 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X11.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xC455 Dword checksum: 0x2D37C455 CRC-32: 0x4BBB6963 Input filename: MS-X11.exe Word checksum: 0xF14E Dword checksum: 0x1E02F14E CRC-32: 0x70ADE7D2 Input filename: BIOS-X11.ROM (system BIOS only) Word checksum: 0x71F0 Dword checksum: 0x18BA71F0 CRC-32: 0x68843085 Input filename: ME1197.bin (ME FW only, for FITC and FPT) Word checksum: 0x2C32 Dword checksum: 0x144E2C32 CRC-32: 0x91419A3E Input filename: 1197upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x1DD4 Dword checksum: 0x11011DD4 CRC-32: 0x2DE8F69C Fixes/Enhancements ------------------ 01. Reserved variable for stabilizing NVRAM block. 02. GPIO72(control USB power) action invert when BIOS get BOARD_ID(GPIO20, GPIO67) equal 0. 03. Taked out data of setupmenu backup function when system is form MFG mode to Normal mode. 04. Added PS/2 keyboard and mouse detect function by CMOS(0x5F) setting for factory. 05. ME setting is for CPU Softsku on MH/SG. 06. Modify Conexant verb table to turn off internal speaker. Notes ------------------ 1. WARNING-WARNING: Beause X11 BIOS has changed NVRAM block, please use FPT.EXE to flash whole SPI ROM. 2. [Module Update Synchronizing with AMI]Intel SandyBridge 4.6.4_Intel_SNB_036 3. [Module Update Synchronizing with AMI]USB 08.10.01 =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X10 Release Date: 2011/02/17 VBIOS: 2102 PSA Version: PSA4208 ME FW: 1197 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X10.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x9642 Dword checksum: 0x2D399642 CRC-32: 0x1003C1B6 Input filename: MS-X10.exe Word checksum: 0x3B8A Dword checksum: 0x1E063B8A CRC-32: 0x2E447151 Input filename: BIOS-X10.ROM (system BIOS only) Word checksum: 0x444D Dword checksum: 0x18BC444D CRC-32: 0x2EF975F1 Input filename: ME1197.bin (ME FW only, for FITC and FPT) Word checksum: 0x2BC2 Dword checksum: 0x144E2BC2 CRC-32: 0x2CD58C91 Input filename: 1197upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x1DD4 Dword checksum: 0x11011DD4 CRC-32: 0x2DE8F69C Fixes/Enhancements ------------------ 01. DF444343 MS: HDD and ODD priorities can't back to default after clear CMOS by jumper. 02. DF452835 MS: "Hyper-threading" setting return to default value after leave "Mfg mode". 03. Closed LAN LED when system is in S0 and disable "Onboard LAN controller". 04. Logo issue is about PS/2 keyboard/Mouse and SMBIOS Type 0xDA / 0x11. 05. Closed USB port0/port1 when disable "Onboard card reader" item. 06. Set different SSID and SVID to Realtek LAN device to differ MissionHill and SawGrass. Notes ------------------ 1. Update EPSA 4207 TO EPSA 4208. 2. [Module Update Synchronizing with AMI]Intel Chipset Reference Board-SugarBay 4.6.4.0_VEB_1AOQI016. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X09 Release Date: 2011/02/10 VBIOS: 2102 PSA Version: PSA4207 ME FW: 1197 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X09.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xFB0F Dword checksum: 0x2D3FFB0F CRC-32: 0xFD3B5EB6 Input filename: MS-X09.exe Word checksum: 0x0EE9 Dword checksum: 0x1E010EE9 CRC-32: 0xC03AA94D Input filename: BIOS-X09.ROM (system BIOS only) Word checksum: 0xA91A Dword checksum: 0x18C2A91A CRC-32: 0xC3C1EAF1 Input filename: ME1197.bin (ME FW only, for FITC and FPT) Word checksum: 0x2BC2 Dword checksum: 0x144E2BC2 CRC-32: 0x2CD58C91 Input filename: 1197upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0x1DD4 Dword checksum: 0x11011DD4 CRC-32: 0x2DE8F69C Fixes/Enhancements ------------------ 01. DF450865 MS: SUT can be wake up by WOL, after disable LOM controller in BIOS Setup. 02. DF450883 S: 19 in 1 Card Reader shown on the Boot Menu(BBS). Notes ------------------ 1. Update ME firmware from 1184 to 1197. 2. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_038 (in order to support B3 stepping chipset). =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X08 Release Date: 2011/01/27 VBIOS: 2102 PSA Version: PSA4207 ME FW: 1184 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X08.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xAFF7 Dword checksum: 0x2D42AFF7 CRC-32: 0x93DF37F6 Input filename: MS-X08.exe Word checksum: 0x0886 Dword checksum: 0x1DF90886 CRC-32: 0xC11714A0 Input filename: BIOS-X08.ROM (system BIOS only) Word checksum: 0xD97D Dword checksum: 0x18C4D97D CRC-32: 0xD6460731 Input filename: ME1184.bin (ME FW only, for FITC and FPT) Word checksum: 0xB047 Dword checksum: 0x144EB047 CRC-32: 0x523AA00C Input filename: 1184upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xA294 Dword checksum: 0x1101A294 CRC-32: 0x55FD546F Fixes/Enhancements ------------------ 01. DF446774 MS: After clear CMOS by jumper the Service Tag turn out to blanked. 02. DF448747 MS: Onboard HDMI audio appears after SUT resume from S3 (add-on GFX installed). 03. DF449872 MS: SUT cannot enter to S3/S4 after disable the USB controller in BIOS. 04. Changing the style of MissionHill's setup help frame Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.1-1 BIOS Spec. : 1.1.1 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000014: ================================================= BIOS Version: X07 Release Date: 2011/01/20 VBIOS: 2102 PSA Version: PSA4207 ME FW: 1184 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X07.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xF781 Dword checksum: 0x2D43F781 CRC-32: 0x3F8F4BE8 Input filename: MS-X07.exe Word checksum: 0xFC32 Dword checksum: 0x1DF7FC32 CRC-32: 0xB641C149 Input filename: BIOS-X07.ROM (system BIOS only) Word checksum: 0x2107 Dword checksum: 0x18C62107 CRC-32: 0x7A167B2F Input filename: ME1184.bin (ME FW only, for FITC and FPT) Word checksum: 0xB047 Dword checksum: 0x144EB047 CRC-32: 0x523AA00C Input filename: 1184upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xA294 Dword checksum: 0x1101A294 CRC-32: 0x55FD546F Fixes/Enhancements ------------------ 01. DF443896 MS: An incorrect error message during POST if SATA port only attach non-boot HDD. 02. DF444333 S: Keyboard failure message appear when we only attach PS/2 keyboard. 03. DF443646 S: Serial mouse has no function in EDIT.com Notes ------------------ 1. Update integrated VBIOS version from 2098 to 2102. 2. Update Intel(R) Sandy Bridge D2 and Q0 microcode version from M12206A7_00000012.pdb to M12206A7_00000014.pdb. 3. Update ME firmware from 1164 to 1184. 4. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_036 5. [Module Update Synchronizing with AMI]Intel SandyBridge 4.6.4_Intel_SNB_035 6. Update EPSA 4206 TO EPSA 4207 =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_00000012: ================================================= BIOS Version: X06 Release Date: 2011/01/13 VBIOS: 2098 PSA Version: PSA4206 ME FW: 1164 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X06.BIN (system BIOS + ME FW, for programmer) Word checksum: 0xE103 Dword checksum: 0x2D4DE103 CRC-32: 0x2C537712 Input filename: MS-X06.exe Word checksum: 0xECE4 Dword checksum: 0x1DF2ECE4 CRC-32: 0x4A1D8391 Input filename: BIOS-X06.ROM (system BIOS only) Word checksum: 0xCECF Dword checksum: 0x18CFCECF CRC-32: 0x65621626 Input filename: ME1164.bin (ME FW only, for FITC and FPT) Word checksum: 0xF370 Dword checksum: 0x144EF370 CRC-32: 0xF6FF9838 Input filename: 1164upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xE4A9 Dword checksum: 0x1101E4A9 CRC-32: 0x184C7FE7 Fixes/Enhancements ------------------ 01. DF438519: CPU model name does not fully shown in BIOS Setup 02. DF438530: TSST, HLDS, Optiarc, TEAC ODD model name does not fully shown in BIOS Setup 03. DF441195: Display will turn on after being waked up by magic packet from S3. 04. DF443899: No alert message during POST after disabled all devices in the boot sequence. 05. DF444845: Some Type have incorrect values in SMBIOS table. 06. Change error pictures for MT and ST when inserts wrong VGA port in the system with final external graphic. 07. Close integrated HDMI port while using VGA card and disabling "Intel Multiple Monitor Feature". Notes ------------------ 1. Update integrated VBIOS version from 2089 to 2098. 2. Update Intel(R) Sandy Bridge D2 and Q0 microcode version from M12206A7_0000000D.pdb to M12206A7_00000012.pdb. 3. Added vendor EON rom to VSCC table in ME setting. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000000D: ================================================= BIOS Version: X05 Release Date: 2011/01/06 VBIOS: 2089 PSA Version: PSA4206 ME FW: 1164 HDD Protection ROM Version: V2.20 LAN PXE ROM: 2.38 Input filename: MS-X05.BIN (system BIOS + ME FW, for programmer) Word checksum: 0x396E Dword checksum: 0x2E50396E CRC-32: 0x249C2F3A Input filename: MS-X05.exe Word checksum: 0x6BC1 Dword checksum: 0x1CE36BC1 CRC-32: 0x07B95A7D Input filename: BIOS-X05.ROM (system BIOS only) Word checksum: 0x1FF0 Dword checksum: 0x19D21FF0 CRC-32: 0xB9A824B2 Input filename: ME1164.bin (ME FW only, for FITC and FPT) Word checksum: 0xF370 Dword checksum: 0x144EF370 CRC-32: 0xF6FF9838 Input filename: 1164upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xE4A9 Dword checksum: 0x1101E4A9 CRC-32: 0x184C7FE7 Fixes/Enhancements ------------------ 01. DF438550 M: Service tag blanked after load BIOS deafault 02. DF440417 MS: Cannot disable WOL function in BIOS setup menu 03. DF442422 MS: i3 CPU L2 cache size shown incorrectly in the BIOS Setup 04. DF443285 MS:PS2 KB LED keeps bright status after SUT run into S3. 05. DF443887 MS: An incorrect error message during POST if no SATA port has been attached 06. DF443899 MS: No alert message during POST after disabled all devices in the boot sequence 07. DF444383 MS: Incorrect information General Help(F1 key) in BIOS setup menu 08. DF444841 MS: System can't auto reboot after flash BIOS using the "/nopause" switch. 09. DF444845 MS: Some Type have incorrect values in SMBIOS table. 11. Add "SMART error message" for 5.3 POST Fault Isolation 12. Correct HDD Protection OPROM sometimes has lower boot priority than HDD. 13. In MFG mode returns SLP, HDD Protection to ¡§Enable and unlock status¡¨ and hides Estar logo. 14. Let Dell Tag checksum, Asset Tag and EPPID default to FF for faster program in ICT. 15. Correct HDD Protection item disappear after load BIOS default. 16. Following Fan failure detect flow chart wiht (MissionHill FAN flow chart20110105.doc). Notes ------------------ =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000000D: ================================================= BIOS Version: X04 Release Date: 2010/12/30 VBIOS: 2089 PSA Version: PSA4206 ME FW: 1164 RAID ROM Version: N/A HDD Protection ROM Version: N/A LAN PXE ROM: 2.38 Input filename: MS-X04.ROM (system BIOS + ME FW, for programmer) Word checksum: 0xB80E Dword checksum: 0x2E5BB80E CRC-32: 0x6C10DF13 Input filename: MS-X04.exe Word checksum: 0xB978 Dword checksum: 0x1CDBB978 CRC-32: 0xC3BA6F0C Input filename: BIOS-X04.ROM (system BIOS only) Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: ME1164.bin (ME FW only, for FITC and FPT) Word checksum: 0xF370 Dword checksum: 0x144EF370 CRC-32: 0xF6FF9838 Input filename: 1164upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xE4A9 Dword checksum: 0x1101E4A9 CRC-32: 0x184C7FE7 Fixes/Enhancements ------------------ 01. DF440478 MS: SUT will resume from S4 immediately 02. DF441680 MS: Fans tests fail via press F12 to run Diagnostics(ePSA) with MS-X02 03. DF441686 MS: Admin/system password will be clear after clear CMOS by jumper. 04. DF442149 MS:SUT unable to skip non-bootable HDD when resume from S4 at the 2nd time. 05. DF442595 MS: SUT will not pause the POST when Pause/Break key pressed during POST. 06. DF442603 MS: Beeps code should alert when booting the system without memory. 07. DF443262 MS: SUT cannot be waked up from S3 via PS2 KB&MS. 08. 2.13 Flash Requirements 09. 2.14 Flash Filename Naming Convention 10. 16 Dell Look and Feel Setup Engine 11. Eup Requirement=> Enable Deep S5 when the item "Wake on Lan from S4/S5" is "Disabled". 12. HDD Protection=> Sometims the HDD Protection OPROM has lower boot priority than other bootable device. Under debugging the issue. Notes ------------------ 1. [Module Update Synchronizing with AMI]Intel CougarPoint 4.6.4_Intel_CPT_032 2. [Module Update Synchronizing with AMI]Chipset Reference Board - SugarBAY 4.6.4.0_VEB_1AOQI015 3. [Module Update Synchronizing with AMI]Sugarbay SNB Specific Code 4.6.3_ SugarBaySNB _3-Beta1 4. [Module Update Synchronizing with AMI]Intel Nehalem 4.6.3_INTEL_Nehalem_36 5. [Module Update Synchronizing with AMI]Flash-Source 4.6.3_Flash_Combined_2_26 6. Update PXE ROM to 2.38 7. Update ME firmware to 1164 8. Release BIOS(Win and Dos) utility package v1.00 (*)9. Please useing FPT tool to flash BIOS because ME firmware update to 1164.(*) =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000000D: ================================================= BIOS Version: X03 Release Date: 2010/12/23 VBIOS: 2089 PSA Version: PSA4206 ME FW: 1141 RAID ROM Version: N/A HDD Protection ROM Version: N/A LAN PXE ROM: 2.37 Input filename: MS-X03.ROM (system BIOS + ME FW, for programmer) Word checksum: 0x4367 Dword checksum: 0x2E8A4367 CRC-32: 0x51A8E2D3 Input filename: MS-X03.exe Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: BIOS-X03.ROM (system BIOS only) Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: ME1141.bin (ME FW only, for FITC and FPT) Word checksum: 0xC10E Dword checksum: 0x1451C10E CRC-32: 0x79E8DB71 Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xB270 Dword checksum: 0x1104B270 CRC-32: 0xCCB45E59 Fixes/Enhancements ------------------ 1. DF439700 MS: No alert message after press CTRL-ALT-DEL 3 time at BIOS loading bar. 2. DF439712 MS: Admin/system password can set non-ASCII 20h ¡V 7Eh characters. 3. DF440478 MS: SUT will resume from S4 immediately 4. 5.1 Memory SPD Data in SMBIOS Type 17(11h) 5. 5.3 POST Fault Isolation 6. Bios requirement from Ubuntu Linux 7. 3.2 Fan Test Interface Notes ------------------ 1. [Module Update Synchronizing with AMI] Intel CougarPoint 4.6.4_Intel_CPT_031 2. [Module Update Synchronizing with AMI] Intel SandyBridge 4.6.4_Intel_SNB_031 =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000000D: ================================================= BIOS Version: X02 Release Date: 2010/12/16 VBIOS: 2089 PSA Version: PSA4206 ME FW: 1141 RAID ROM Version: N/A HDD Protection ROM Version: N/A LAN PXE ROM: 2.37 Input filename: MS-X02.ROM (system BIOS + ME FW, for programmer) Word checksum: 0x13DD Dword checksum: 0x2E9C13DD CRC-32: 0x219F198D Input filename: MS-X01.exe Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: BIOS-X00.ROM (system BIOS only) Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: ME1141.bin (ME FW only, for FITC and FPT) Word checksum: 0xC10E Dword checksum: 0x1451C10E CRC-32: 0x79E8DB71 Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xB270 Dword checksum: 0x1104B270 CRC-32: 0xCCB45E59 Fixes/Enhancements ------------------ 01.DF438551 M: No CPU/system fan failure message 02.DF438573 M: No alert message display at POST after removing Coin cell 03.DF438574 M: No alert message after CMOS clear by jumper 04.DF438575 M: SUT power on with Last state of AC recovery test in S4 05.DF438586 M: Admin PSWD charactors amount does not meet the spec 06.DF438588 MS: System hang when press ESC once at BIOS PSWD prompt during POST 07.DF438617 M: System PSWD is not cleared after clear Administrator 08.DF438622 M: SUT does not shutdown automatically when PSWD failed 3 times 09.DF438624 M: No keyboard error message appears during POST when no keyboard attached 10.DF439712 MS: Admin/system password can set non-ASCII 20h ¡V 7Eh characters. 11.DF439742 MS: Load Default function has been inactive. 12.DF439798 MS: SUT halts by CPU fan error message in the POST. Notes ------------------ 1. Change PSA4204 to PSA4206 2. Use graphic instead of text string when user inserts wrong VGA port. 3. MissionHill/SawGress MT fan detect CPU fan and SYSTEM fan2. 4. MissionHill/SawGress ST fan detect CPU fan and SYSTEM fan1. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000000D: ================================================= BIOS Version: X01 Release Date: 2010/12/09 VBIOS: 2089 PSA Version: PSA4204 ME FW: 1141 RAID ROM Version: N/A HDD Protection ROM Version: N/A LAN PXE ROM: 2.37 Input filename: MS-X01.ROM (system BIOS + ME FW, for programmer) Word checksum: 0x6B5B Dword checksum: 0x2FDE6B5B CRC-32: 0xDCCAE1A0 Input filename: MS-X01.exe Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: BIOS-X00.ROM (system BIOS only) Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: ME1141.bin (ME FW only, for FITC and FPT) Word checksum: 0xC10E Dword checksum: 0x1451C10E CRC-32: 0x79E8DB71 Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xB270 Dword checksum: 0x1104B270 CRC-32: 0xCCB45E59 Fixes/Enhancements ------------------ 01. DF438562 ePSA is able to launched with pressing F8 during POST. 02. DF438564 An additional option exist under Onboard Lan Controller. 03. DF438567 BIOS doesn't disable boot function for internal USB card reader. 04. DF438576 CMOS jumper is unable to clear system time clock. 05. DF438573 No alert message display at POST after removing Coin cell. 06. DF438574 No alert message after CMOS clear by jumper. 07. DF438587 Serial port is not locked with login BIOS setup with User PSWD. 08. DF438588 System hang when press ESC once at BIOS PSWD prompt during POST. 09. DF438589 PSWD is unable to clear by Clear Password jumper. 10. DF438618 User Password is instead of System Password. 11. DF438622 SUT does not shutdown automatically when PSWD failed 3 times. 12. Modifying HWM registers and Adding CPU Tcontrol offset is for thermal team. 13. Adding Fan SMI interface function is for fan testing by Delldiag version 1392. 14. Adding "wake on LAN" item in setup menu. 15. Changing VBIOS to 2089. 16. Adding CPU fan error function. Notes ------------------ 1. If the vender of main SPI ROM is "SST", please remove second SPI ROM from MB. 2. VBIOS version is 2089. =============================================================================================== *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** *********************************************************************************************** =============================================================================================== System: Inspiron 620(s)/Vostro 260(s) SSID: 04ED(Inspiron 620)/04EE(Vostro 260) CPU : Intel Sandy Bridge (LGA1155) SB : Intel H61 SuperIO: SCH5514E Flash : SPI 32Mbits flash BIOS Code Base: AMI uEFI Aptio: 4.6.4.0 ================================================= MRC Revision : 1.1.0.0 BIOS Spec. : 1.0.0 Microcode list(CPU, Stepping, Microcode update: supported CPUs): SANDYBRIDGE B0 M12206A1_00000007: SANDYBRIDGE B2 M12206A2_00000026: SANDYBRIDGE C0 M12206A3_00000008: SANDYBRIDGE D0 M12206A5_00000007: SANDYBRIDGE D1 M12206A6_00000028: SANDYBRIDGE D2 M12206A7_0000000D: ================================================= BIOS Version: X00 Release Date: 2010/11/30 VBIOS: 2080 PSA Version: PSA4204 ME FW: 1141 RAID ROM Version: N/A HDD Protection ROM Version: N/A LAN PXE ROM: 2.37 Input filename: MS-X00.bin (system BIOS + ME FW, for programmer) Word checksum: 0xC635 Dword checksum: 0x30F2C635 CRC-32: 0xF4B5D4CD Input filename: MS-X00.exe Word checksum: N/A Dword checksum: N/A CRC-32: N/A Input filename: BIOS-X00.ROM (system BIOS only) Word checksum: 0xDF10 Dword checksum: 0x1479DF10 CRC-32: 0x91004844 Input filename: ME1141.bin (ME FW only, for FITC and FPT) Word checksum: 0xC10E Dword checksum: 0x1451C10E CRC-32: 0x79E8DB71 Input filename: 1141upd.BIN (ME FW only, for FWUPDLcl) Word checksum: 0xB270 Dword checksum: 0x1104B270 CRC-32: 0xCCB45E59 Fixes/Enhancements ------------------ 1.First release.charlielondon
3 Posts
0
March 19th, 2012 10:00
thanks