This post is more than 5 years old
6 Posts
0
1894
dell T5600 PERC H310 led connector
Hello
Where is the socket on the Precision T5600 system board for the LED connector cable from the Perc H310 please.
I have looked at http://www.dell.com/support/article/us/en/19/SLN132460/en and particularly no. 5. "Connect the AUX_LED cable to the H310 connector labeled SAS_ACT_LED_Conn". However, it is a new install and I can't see where to place the cable in the system board.
thanks
sleepydavid
6 Posts
1
July 31st, 2016 09:00
It is located right behind the PSWD jumper (see no. 21 of page 36 of manual for PSWD jumper position)