Unsolved
This post is more than 5 years old
11 Posts
0
244105
Optiplex GX620 Beep Code 1-3-2
My system has 2 x 512MB Ram (DDR PC2 5300). I installed another 2 x 1GB (DDR PC2 5300). Then when I started the system I got beep code 1-3-2, no video output.
I've removed the extra RAM, but get the same beep code. I've tried removing and re-installing the original RAM and every possible sensible combination, but still can't get pass this beep code.
Anybody have any ideas?
Thanks
Alex
mombodog
12.7K Posts
0
December 31st, 2006 19:00
Alex Kazovic
11 Posts
0
January 1st, 2007 05:00
mombodog
12.7K Posts
0
January 1st, 2007 14:00
Alex Kazovic
11 Posts
0
January 1st, 2007 18:00
Hydralisk00222
2 Intern
2 Intern
•
2.4K Posts
0
January 1st, 2007 20:00
Message Edited by Hydralisk00222 on 01-01-200705:14 PM
mombodog
12.7K Posts
0
January 9th, 2007 02:00
Message Edited by mombodog on 01-08-200710:55 PM
Alex Kazovic
11 Posts
0
January 9th, 2007 02:00
Alex Kazovic
11 Posts
0
January 9th, 2007 19:00
mombodog
12.7K Posts
0
January 9th, 2007 20:00
jordan.david
1 Message
1
June 17th, 2014 08:00
Hi,
I know this post is really old, but I was just having the same problem, post beep was 1-3-2.
What fixed my problem was taking out the ram that was not the same brand as the other sticks.
It may have just been that the computer didn't want to accept another brand, but also could be that that ram stick was faulty.
Hopefully this helps anyone else who searches this topic soon!
shesagordie
10 Elder
10 Elder
•
46K Posts
0
June 17th, 2014 09:00
This thread has been locked due to it's age, if you have a similar issue, please use the 'New post' feature at the top of this page and start a new thread.
Bev.