Unsolved
This post is more than 5 years old
41 Posts
0
372
Knowledge Maintenance Notifications for Enginuity 5876 Q3 SR sent 11/06/2013
Enginuity 5876 Q3 SR was made generally available on October 21, 2013.
The following Knowledge Maintenance (KM) notifications, which are associated with the Enginuity product announcement, were sent to certified Specialists for the following associated EMC Knowledge Maintenance tracks:
KM 7.5-2 for Symmetrix Solutions EMCTA |
KM 6.8-2 for Symmetrix Solutions EMCIE |
KM 6.5-2 for Symmetrix Solutions EMCPE |
If you're a Proven Certified Specialist or Expert in any of these tracks, you should have received an e-mail notification between 12:40 p.m. and 1:30 p.m. EST on Monday, November 4, 2013. If you did not receive the notification and you believe you should have, you can take the following steps to correct the situation:
- Check your Junk Mail or Spam folder to see if it was filtered.
- If you did not receive the e-mail, check the EMC Cert Tracker at https://www.certmetrics.com/emc to see if your e-mail address is correct.
- If your address in Cert Tracker is missing or incorrect, enter the correct address so you will receive future notifications.
- Write to education@emc.com if you need further help, or need to receive the current links.