Unsolved
This post is more than 5 years old
20 Posts
0
6449
IP Addresses on Equallogic
I am using Equallogic for iSCSI. How many IP addresses should I configure on the Equallogic for use with iSCSI?
Unsolved
This post is more than 5 years old
20 Posts
0
6449
I am using Equallogic for iSCSI. How many IP addresses should I configure on the Equallogic for use with iSCSI?
Top
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
February 20th, 2015 12:00
One Group IP address and one IP address for each physical port your arrays have.
Or if you are using out-of-band management (aka Dedicated Management) Then you would also have a Management IP for the group, and one IP for each physical management port if that model has a dedicated 10/100Mb interface.
Regards,