Unsolved
This post is more than 5 years old
2 Posts
0
9765
Double serial pcmcia card problem
I got a problem when I reboot the computer : the card can't find enough ressource to work ( code 12 )
To correct this, I have to eject the card and insert it back in the pcmcia slot after each reboot.
I tryed any of the possible ressource config (I/O 3e8 3f8 ) which should be free: still the same problem , I tryed to change the driver still the same.
my config: a dell latutude c600/c500
my os : windows XP professionnal
my card : a double serial pcmcia card brandless sold by Black Box , detected by windows xp as 'Siliconix' brand
thanks in advance for your help
olivier
Flooby
3K Posts
0
November 19th, 2004 10:00
Is this a combination modem/NIC card you're using? Have you checked the card manufacturer's support site, to see if this is a known issue, and whether they have any suggested workarounds? You might also try booting to System Setup (with the card installed) and clearing/resetting the hardware configuration, to see if the system will sort the hardware out properly. See the link below for instructions.
http://support.dell.com/support/topics/global.aspx/support/kb/en/document?DN=FA1035267
olivier42
2 Posts
0
November 19th, 2004 12:00
Flooby
3K Posts
0
November 19th, 2004 12:00
Assuming that the product at the link below is what you're referring to, you might want to see if the available driver is different from yours, whether it works, and if not, whether these people can offer any assistance.
http://www.silicom.co.il/ProductsAndEventsinside.asp?id=124