Highlighted
fred64
Bronze

Precision M4800 Power Switch does not work

I have a real stumper.  The power button does not function.  Will not turn on the laptop. I set the bios to power on with A/C, so I can get it to power on by unplugging and replugging the power cord.    When Window has power switch set  to sleep or to shut down -- it does not.  Holding the power switch down will not shutdown the laptop. 

I installed the latest bios from the support pages.  I replaced the CMOS battery.  I replaced the power switch. While I had it opened up I checked for loose connections, debris, dirt, etc.   At least to the point I had access (I did not open beyond removing the palm rest to get to the power switch). 

I also tried using an E-Dock.  When docked the power switch on the dock does not power on or power off the laptop either.  Same symptoms as with the power switch on the laptop.

Everything else on the laptop seems to work just fine.  Not sure what to do next with this.  Sad part is this started about 4 weeks after the Dell service expired. 

0 Kudos
2 Replies
Moderator
Moderator

RE: Precision M4800 Power Switch does not work

fred64,

The power switch may have a loose connector on the motherboard.  If that is the issue, then you will need to replace the motherboard. 


Social Media Support
#IWork4Dell
To help us troubleshoot, please send us the Dell service tag number via a private message
Drivers and Downloads
Driver order




0 Kudos
fred64
Bronze

RE: Precision M4800 Power Switch does not work

Actually the bad connection would not be from the power switch.  Not only did I check that, but the eDock uses a separate path through the bottom of the laptop to the mother board.  It would have to be at some point further down the line.  Are the power control circuits located on the mobo?  Is it possible there is some additional connection?

0 Kudos