Mad_Mike1
1 Copper

support for Hyper-V 2012/VNX5300/iSCSI

Dear community,

Do we know when the eLAB will be updated as for support Hyper-V 2012 and iSCSI for our VNX platform?

Thanks in advance!

Labels (1)
Tags (3)
0 Kudos
1 Reply
Tx1
1 Copper

Re: support for Hyper-V 2012/VNX5300/iSCSI

Mike, something similar came up earlier on a different thread.  Here's a cat and paste ....

The short answer is that the list of supported configurations and layered EMC S/W will be provided in two places:

1) ELab Navigator (as it is refreshed); and

2) The Microsoft Windows Catalog as new configurations are validated and posted ... Here's a quick link to the EMC w/ Windows 2012 certification list ... http://www.windowsservercatalog.com/results.aspx?&text=EMC&chtext=&cstext=&csttext=&chbtext=&bCatID=...

You ask about Hyper-V 2012, but in reality this is Windows Server 2012 - unless you are specifically asking about Hyper-V Server 2012 (the bare-metal install) ... which is still a variant of Windows Server 2012.

In the list provided by the link in item (2) above, you will find a number of VNX platforms with iSCSI target support .. please check all pages.  It's possible that your specific VNX system is already certified.

0 Kudos