Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
3461
EBR VBA scalability for DR
We are planning to deploy EBR VBA for VM restores at DR site which was backed up from primary site.
- Backup to DD and clone to DR DD using VBA and primary vCenter.
- Restore VMs using the same VBA in the NW datazone but using the D vCenter.
Is this supported, since the we have metadata in Networker and VBA host and cloned data in DR DD ?
Can someone let me know how we can integrate one VBA host with multiple vCenter ?
kshariprakash
29 Posts
1
January 25th, 2014 21:00
Hi Abul,
Will there be a new / different networker Server be deployed on the DR site as well?
You may need to perform the disaster recovery of the EBR / NVP Appliance ( restore the validated check point on DR Vcenter & add / re-register to the DR Vcenter ).
Not sure if this is tested.
HTH
Regards
Hari Prakash.
tech88kur
142 Posts
0
January 26th, 2014 20:00
Since metadata is in nsr server in production, you would require metadata at DR nsr server, you may achieve it by replicating the LUN of metadata in DR site. Get a new VM in DR with the same nsr server name.
Regards
tech88kur
odurasler757
25 Posts
0
May 2nd, 2014 09:00
I'm actually on the same predicament. Customer would like to see how to recover a cloned-VM backed up by EBR. Based on what you guys are saying, it can't be done unless you fail-over the EBR (and among other things) and re-registering it with the DR vcenter?
Dustin21
7 Posts
0
May 28th, 2014 09:00
Same here. I have a similar setup and I'm trying to find out how to recovery VM's at an offsite DC during a DR where the primary DC is down. This will be a show stopper for us if I can't do it. I opened up a case with support to see if their is a way.
Swapnil_Pandey
86 Posts
0
August 4th, 2014 07:00
I have the same requirement, have this been figured out by you. Please suggest
Swapnil_Pandey
86 Posts
0
August 4th, 2014 23:00
Hi, have you got any success on this please share the same.... Have you tried it out...
kshariprakash
29 Posts
0
August 5th, 2014 00:00
Hi Swapnil,
Current scenario (EBR)doesn't support restoring VM's it via different Vcenter (DR Vcenter)
I heard that NetWorker Product team is working out on this.
You can check with Networker support team about the tentative networker release which this is supported.
Regards
Hari Prakash.
Swapnil_Pandey
86 Posts
0
August 5th, 2014 00:00
Thanks a lot Hari for your prompt response, however I got one more
question, what if I keep the same hostname and ip address at DR for the
vcenter we are already replicating networker server with recover point to
DR site, and our setup supports the same ip addresses at the production and
DR site…. Will it be feasible then???
Meanwhile I will check with the support for more details, but it seems like
you have done quite a lot of research on this so your inputs will be
helpful…
From: kshariprakash
Sent: Tuesday, August 05, 2014 10:04 AM
To: Swapnil_Pandey
Subject: Re: - EBR VBA scalability for DR
ECN
EBR VBA scalability for DR
reply from kshariprakash
in *NetWorker
Support Forum* - View the full discussion
Dustin21
7 Posts
0
October 17th, 2014 10:00
Sorry for the long delay. I did end up opening up a case and they said the same thing kshariprakash replied. Our Networker SE said their might be a way to change the DNS name of your VBA server that would be recovered to the offsite DC in order to make the offsite vcenter think it was talking to the VBA server at the offsite DC, but he said it's not a support solutions. I have not done any testing on this as of yet. They are working on the issue internally and we were not the only customer asking for a resolution on this issue. I'm still waiting to hear back from our EMC team to find out what solution they will be coming up with.
Ram.P
16 Posts
0
January 28th, 2015 23:00
Hi All,
Is there anything you have latest onto this from EMC or from your experiences. In My environment because of this limitations of EBR Backups not supporting the Restores at DR DC, I am forced to use VADP.
Anything new would be helpful.
Thanks
Ram
LilianaW
40 Posts
0
January 29th, 2015 01:00
Hello Ram,
Cross vCenter restores with NetWorker VBA is supported with new released today version 8.2.1 .
For this service pack, a virtual machine that's been cloned to a secondary site with its own vCenter and VBA appliance can be recovered on the secondary site to a different vCenter even if the primary site becomes unavailable, so long as it's all within the same NetWorker datazone.
Regards,
--Liliana
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
January 29th, 2015 06:00
It’s even supported under 8.2 as well with a script but you may need to contact with EMC support to get this.
Regards,
Abul Khasim
EMCTAe-BRS,EMCIE
Solutions Architect II
Professional Services
O: +91 806-737-8294
US Toll free: +1 800-782-4362 Ext 785-8294
abul.chozhiyarkulangar@emc.com
EMC2
where information lives