Unsolved
This post is more than 5 years old
23 Posts
0
1147
EMC Networker 7.6 restores ends up with a blue screen
Hi...
I followed the directions in the Diaster Recovery to the best of my knoweldge ..
However ... I am still having issues with restoration..
I get a blue screen .. (see attached)
Help !....
I dont know what info i should provide..
windows server 2003 Std 32bit.
Networker 7.6
On VMWARE ESX 4.0 ... (i tried it with both hardware version 4 and 7)...
and nothing about the disk controller changed..
any ideas ?
thx
ble1
2 Intern
2 Intern
•
14.3K Posts
0
May 3rd, 2010 07:00
Could you list all the steps you did for this restore?
I didn't do this with versions you have (rather with ESX 3.5 and vms running Win2k and win2k3 with 7.4.5.x or 7.5.1.x and there no problems were seen).
Cheers,
H
jublock
1 Message
0
March 1st, 2012 23:00
I have the same error with a restore of windows 2008 R2 virtual machine.
We are using the networker client 7.6 SP3.
Bebo2k
544 Posts
0
March 2nd, 2012 01:00
Or this Powerlink article as well :
https://solutions.emc.com/emcsolutionview.asp?id=esg113805
Otherwise please create a new post with your issue details , and you can add a link to this post as reference.
Thanks,
Ahmed Bahaa
Bebo2k
544 Posts
0
March 2nd, 2012 01:00
jublock,
Please create a new post for a the new problem rather than adding on the end of an old post.
Regarding your issue, You can check the following Powerlink article :
https://solutions.emc.com/emcsolutionview.asp?id=esg125435
Thanks,
Ahmed Bahaa