Highlighted
LTO6
1 Nickel

Failing to clone savesets

Jump to solution

Hello Everyone,

I am cloning some savesets from datadomain to lto tapes. At Clone job details, I am seeing some of the savesets as running and failed at the same time (see picture).

Has anyone experienced this? Also, does anyone has experience with some of the savesets failing to clone and some cloning to lto tape without problems?

Any idea is appreciated.

networker error.JPG.jpg

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
bingo.1
4 Tellurium

Re: Failing to clone savesets

Jump to solution

May I suggest you clone the save set manually and add some verbosity to the process:

    nsrclone -S <ssid> -b <clone_pool> ....

We clone since years from DD to LTO5 w/o problems. We are using scripted cloning though.

0 Kudos
4 Replies
bingo.1
4 Tellurium

Re: Failing to clone savesets

Jump to solution

Please verify the ssid & cloneid with mminfo.

It might be that the clone process might have been failed and retried.

0 Kudos
LTO6
1 Nickel

Re: Failing to clone savesets

Jump to solution

I did. Savesets are not cloned.

I am seeing lot's of errors like this in the full log:

nsrd: Invalid mmd reservation request: unable to find reserved mmd session id = 6.

nsrrecopy: ERROR - do_nsr_rstart failed.

nsrrecopy: Cannot start recover with server.

0 Kudos
bingo.1
4 Tellurium

Re: Failing to clone savesets

Jump to solution

May I suggest you clone the save set manually and add some verbosity to the process:

    nsrclone -S <ssid> -b <clone_pool> ....

We clone since years from DD to LTO5 w/o problems. We are using scripted cloning though.

0 Kudos
LTO6
1 Nickel

Re: Failing to clone savesets

Jump to solution

Cloning through CLI with nsrclone worked without problems. Strange. Thanks for the good tip. It seems I will need to use CLI instead of GUI.

0 Kudos