Start a Conversation

Unsolved

This post is more than 5 years old

2979

March 3rd, 2015 06:00

Need help to limit the Bandwidth for replication

Hello All

   

I have a challenge while customer has CCR from Site A to B & vice versa. The Customer have a network link between the Data Centers A & B which is 10 MBPS variable, and if the bandwidth cross 10MBPS then he has to pay extra to ISP. In previous days the bandwidth utilization never exceeded 3 to 4 MBPS in general but after the seeding started from Primary DD to Secondary DD and vice versa the scenario is totally changed. Now the Bandwidth utilization is touching 50 MBPS continuously.

     The Question is how can we limit the bandwidth usage from both side so the usage can be within a particular range. The environment
details are as below


 

Type


 

 

Site A


 

 

Site B


 

 

Backup Server


 

NetWorker Server A


 

 

NetWorker Server B


 

 

Backup Destination


 

 

DDBoost A


 

 

DDBoost B


 

 

Replication


 

 

DDBoost A Devices will be
  replicating to DDBoost B Clone Device


 

 

DDBoost B Devices will be
  replicating to DDBoost A Clone Device


 

 

Replication Mode


 

 

Using CCR


 

 

Using CCR


 

 

Bandwidth Max


 

 

Max available is 10 MBPs


 

 

Max available is 10 MBPs


 

Tried to setup the below settings in both the data domain but no performance change noticed. Please suggest

1 Attachment

156 Posts

May 18th, 2015 05:00

Moved to NetWorker Support Forum

2 Intern

 • 

633 Posts

May 18th, 2015 05:00

Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility.  Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.

You can do so by selecting "Move" under ACTIONS along the upper-right of this post.  Then search for and select the application which this post refers to. 

2 Intern

 • 

14.3K Posts

May 19th, 2015 02:00

It would be more correct Data Domain than NW since CCR is ddboost at DD level.  In NW you can't throttle it and on DD level there is nothing to throttle it either (check ddboost command on DD).  At least not in DDOS 5.4 - not sure about 5.5 and 5.6.  Given that you are EMC guy, try to reach to DD folks and see if they have plan to include ddboost replication throttling as well.

No Events found!

Top