Unsolved
This post is more than 5 years old
2 Posts
0
713
Connect three swtich
I had bought a new switch of Dell N2028 and existing had two switch of Dell N2024
Can i may below connection?
Dell N2024 (SW-A) Port 1 to Dell N2024 (SW-B) Port 1
Dell N2024 (SW-A) Port 2 to Dell N2028 (SW-C) Port 1
Dell N2024 (SW-B) Port 2 to Dell N2028 (SW-C) Port 2
If yes, need setup any config? or how to do this?
Thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 26th, 2016 07:00
You can connect the switches in this manner, but it looks like this would also create a loop. This means that you need to anticipate for spanning tree to cause one of these interfaces to transition to a discarding state.
The Dell support site has some great documentation on these switches.
http://dell.to/18y0W6O
There is a getting started guide that will help with the initial setup and configuration. You can then use the Config/CLI guide to help configure additional features.
There is also a list of popular KB articles under "Top Solutions".
Let us know if you run into any specific questions during configuration.