Unsolved
This post is more than 5 years old
13 Posts
0
56563
Connect two 5548P with fiber
Hello
I need to connect two 5548P switches with fiber since they are quite far apart. In terms of hardware, what is required? Also, what is the type of fibre required for a connection like this?
Thanks
/M
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
January 26th, 2016 16:00
Hi,
How far apart are you needing? You would need SFP+ transceivers on each of the switches and then the fiber to connect them. Depending on the distance you would use SX or LX fiber. Page 35
martentrogen
13 Posts
0
January 27th, 2016 03:00
So I need to buy one of these
accessories.us.dell.com/.../productdetail.aspx;l=en&s=dhs&cs=19&sku=310-7225&mfgpid=240965
even if it looks like the switch is ready to connect a fibreconnector to from the picture on page 35 where it shows 2 SPF+ ports?
Thanks for your help
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
January 27th, 2016 09:00
The SFP+ ports are where you connect a transceiver. You can get twinax cables that connect directly, but they have a 5M distance limit.