OID To retrieve dynamic address database?

OID 1.3.6.1.2.1.17.7.1.2 (dot1qTpFdbPort)

This will give you the "show bridge address-table".

Here's an example of something you might see:

OID Value
dot1qTpFdbPort.391.0.15.31.33.109.17 2


Take the OID after 391 and that's the MAC address...it just needs to be converted.

The value is the port the MAC address is on.

Message Edited by Mithrilhall on 11-06-2006 10:35 AM

Message Edited by Mithrilhall on 11-06-2006 10:36 AM

I believe this is it....



.1.3.6.1.2.1.17.7.1.2.2.1.2

Hmmm, well that certainly does show the MAC addresses eventually. It also shows all kinds of other info.

The dynamic addresses seem to start at .1.3.6.1.2.1.17.4.3.1.1.0.

How do I find the port associated with the MAC address?

Interesting. Thank you.
I found that using snmpwalk in Linux on the OID .1.3.6.1.2.1.17.4.3.1.1 returns all the MACS in the database (in hex) but no ports.

Message Edited by JPLaflamme on 11-06-2006 11:13 AM

Let me try it from my linux laptop and see what I get.

I get inconsistent results on a 3448 using 1.3.6.1.2.1.17.7.1.2. Mostly timeouts for some reason. After trying and failing on 1.3.6.1.2.1.17.7.1.2 it also causes timeouts on .1.3.6.1.2.1.17.4.3.1.1. Weird. I plan on updating the firmware. Maybe that will fix something.

I guess when I see "INTEGER: 3" that means port 1/G1?

Seems to work much better/faster on the 3348 than the 3448

Message Edited by JPLaflamme on 11-06-2006 11:56 AM

Doh!

I thought you had posted 3348. Let me check what I have for 3448.

Sorry, I have both and will be needing to do this for both.

Works for me on both 33XX, 34XX and 6024X switches.

Integer 49 would be 1/G1.

I also see vlans in the data.

Message Edited by Mithrilhall on 11-06-2006 12:01 PM

It looks like the information returned from a walk on a 33XX & a 34XX are different so just keep that in mind when writing your script.

I wrote some custom pages to turn ports on/off via snmp. Now I'm working on saving the running configuration to the startup configuration.

I must have typed in the wrong MAC (thought I was looking at an integer 3 MAC). :)

Ya, I converted some of the oid integers to hex for testing on the 3448 to see what port INTEGER:51 is and it returned nothing. I see a lot of "INTEGER: 3" and "INTEGER: 51" and "INTEGER: 52" on the 3448 but not really any of the ports I would expect to see.

And actually, I just queried a MAC that said it was "INTEGER: 3" (So that should mean port 3) but when I search it in the web interface on the 3348 it's port G1.

Definitely 1.3.6.1.2.1.17.7.1.2 is causing a problem on my 3448's. When I query it with snmpwalk it just keeps timing out and then I can't even get in the web interface but the traffic is still flowing.

Curious, what version 3448's are you using?

Message Edited by JPLaflamme on 11-06-2006 12:59 PM