Unsolved
1 Rookie
•
28 Posts
0
2200
%S3048-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive tr
S3048-ON switch running Software Version : 9.14(0.1)
We keep seeing this across all our network on S3048-ON's
%S3048-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive traffic; will be rate controlled
%S3048-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive traffic; will be rate controlled
%S3048-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive traffic; will be rate controlled
%S3048-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive traffic; will be rate controlled
----------------------------------- show process cpu ---------------------------
CPU Statistics Of Unit 1
=======================================
CPUID 5sec 1min 5min
--------------------------------------------------
CORE 0 28.24 14.99 15.43
CORE 1 23.92 17.61 17.11
Overall 26.08 16.30 16.27
---------------------------- show process cpu summary --------------------------
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
UNIT1 5% 4% 4%
CPU and mem looks okay.
Thanks!
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
September 25th, 2018 11:00
Hello
I would suspect that you have a lot of traffic on the management port. If you have management software monitoring the switch then increase the polling interval. If you have several monitoring applications then use a centralized application instead.
Thanks
Joro Petrov
1 Rookie
1 Rookie
•
28 Posts
0
September 27th, 2018 10:00
We are using OMNM. What are your suggested polling values?