Switch Trunking and Access

I'm a relative newbie to configuring these switches and I have a question-

I'm connecting a 5324 (satellite) to a 6248(main). I want to maintain vlan tagging between the two, so I connected a single cable from one to the other and configured it to be a trunk.

However, I can't ping the 5324 anymore when plugged in to the 6248. Do I need to plug in another cable for management access?

Thanks.

Responses(2)

DRNO10

184 Posts

0

November 29th, 2007 20:00

Now that you have changed the port over to the trunk it will only pass tagged packets. Have you added any vlans (mainly your management one you are pinging from) to the trunk?

A

alex2675

2 Posts

0

December 3rd, 2007 20:00

how trunk twice vlans ( one voice, one data ) in 6224 have these config ,

( dell 6224 )

console#config

console(config)#interface ethernet 1/g24

console(config-if-1/g24)#switchport mode general

console(config-if-1/g24)#switchport general allowed vlan add 31,131 tagged

console(config-if-1/g24)#switchport general pvid 1

console(config-if-1/g24)#exit

in cisco 4506

interface GigabitEthernet2/48
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 31,131
switchport mode trunk

please help....

View All

No Events found!

Networking General

Switch Trunking and Access