Unsolved
This post is more than 5 years old
1 Message
0
27213
XPS 600 Drive 5 Not Found: Parallel ATA, PATA-1 (PRI IDE slave)
Hello, I have a XPS 600. I have two problems (maybe they are related).
- I replaced the DVD CD-RW Drive with a new LG DVD CD-RW Drive and am now receiving the following message every time I start my computer: Drive 5 Not Found: Parallel ATA, PATA-1 (PRI IDE slave). Press F1 to ignore, or F2 to enter Setup.
- I have a ribbon in the hard drive labeled HDD3 that is not connected to anything and I am not sure if this is how it should be or if I need to plug that into a slot on the motherboard.
Any help is greatly appreciate.
Thank you,
Jen
Azhar77
11 Posts
0
November 11th, 2008 04:00
Hi There,
You just need to go to the system setup by tapping the F2 key as soon as you turn on the computer and you will be into a blue coloured screen and you need to use u need to navigate down to drives and hit enter and again move down to drive 5 pata 1 and hit enter and highlight off and hit enter this should fix the issue in case if you still have the issue let me know.
Azhar77
11 Posts
0
November 11th, 2008 04:00
one more thing after you turn off the drive you need to hit escape and then select save nad exit and hit enter