Unsolved
This post is more than 5 years old
3 Posts
0
6719
Changing Storage Bus Number
Hi
I have been trying to install Microsoft Cluster Service on Poweredge 4400 using Server 2003. One of the requirements is that the shared disk has to be on a different drive than the OS. I have a scsi raid controller with 2 channels using 8 harddisk raided as 2. one on each channel.
Is it possible to change the storage bus so that each channel is seen as being on a separate storage bus.
Thank you, Vish
Dev Mgr
4 Operator
4 Operator
•
9.3K Posts
0
August 21st, 2009 07:00
There's the option to buy a daughter card that would split the SCSI bus. This would split the 1 x 8 scsi backplane into 4 + 4 (no other choices), which probably isn't what you were looking for.
Are you just wanting to create a single node cluster (to cluster 2 servers would require external storage space like a PV220S or so)? If so, what do you need the clustering for that you couldn't run on a stand-alone server?