Unsolved
This post is more than 5 years old
2 Posts
0
16086
PowerEdge R310 + PERC S300
Dear all,
Is there a driver for PERC S300 for LInux Redhat 6.1
If not, Can I put the S100 firmware on the S300, I know that both have the same chipset LSI 1068E
Note:
I have another server with S100 and Redhat 6.1 can read it .
Thanks.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 22nd, 2011 06:00
The S100 and S300 are designed to work with Windows operating system.
The S100 and S300 are not designed to work with non Windows based operating systems.
Here is a overview and list of supported operating systems.
support.dell.com/.../a5_sectb.htm
Here is an article from Red Hat covering the topic.
access.redhat.com/.../DOC-19840
Beyond the information that is listed above, there are no tested and validated workarounds to getting the controller to work on Linux.
Thanks