5 Posts
0
957
R410(not hot swap) + H700 cables
I've a R410 non hot swap and replaced the perc 6i with the Perc H700.
The original cable (image) is too short to plug H700 direct to SAS drives. What cable I need?
5 Posts
0
957
I've a R410 non hot swap and replaced the perc 6i with the Perc H700.
The original cable (image) is too short to plug H700 direct to SAS drives. What cable I need?
Top
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 12th, 2020 09:00
Randon,
The cable needed to go from the cabled drives to the H700 is part # 8FF8M.
Hope this helps
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 17th, 2020 08:00
It is compatible with the R410 as well.
Randon
5 Posts
0
February 17th, 2020 07:00
Thank you! Searching for the PN: 8FF8M I found a similar cable: PN: X394K
Do you know if that works too?