Unsolved
This post is more than 5 years old
9 Posts
0
2930
Which SAS cables for H200 in R610?
Hey Everyone!
I need advice on what H200 version to place into my T610 server and then the cables that would be used accordingly. It looks like the PERC 6/i that is installed has a completely different type of cable structure than what the H200 would require, so some guidance would be great. Can somebody point me to the official part numbers (or Dell page) that indicates what cables to get for the H200 and the right H200 to get to fit correctly in the T610. I'm trying to gain JBOD and a greater than 2TB limit for this old beast.
Thanks in advance!
SkipDiver
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 3rd, 2018 09:00
Hi,
The H200/H700 cables are N168M and R144M from the controller to the backplane.
SkipDiver
9 Posts
0
July 3rd, 2018 10:00
Perfect! Thank you for the reply. Would you know the best H200 model for it? I see integrated (which I assume would be the one I need, but model numbers are....confusing) and there is a PCI version that has a bracket attached. Suggesstions? Solutions?
Thank you again!
SkipDiver
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 3rd, 2018 10:00
Integrated goes into the slot where the perc6/I was. There is an adapter version with a pci bracket. Part number 47MCV.