Unsolved
This post is more than 5 years old
14 Posts
0
3269
poweredge r510
I did a hot swap of my drives that were in non-critical state. Once I changed them out the drives just say failed. Not sure what will fix this issue and I am unaware if the rebuild actually happened. I have used open manager to see if I can manually rebuild them but I only have the option of blink or unblink.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
1
April 14th, 2016 07:00
Umihen,
Do you just have Physical Disks in a failed state, or is the Virtual Disk also in a failed state as well?
Also, what is the current Raid configuration?
We will need to answer these prior to knowing the proper steps to take forward.
Let us know/
umihen
14 Posts
0
April 14th, 2016 10:00
I have a raid 1 and raid 5. Its the physical disks that I changed in the failed state. The virtual disk that is a raid 5 is in the degraded state.
1 Attachment
dell picture.JPG
umihen
14 Posts
0
April 15th, 2016 17:00
Also I am trying to upgrade the Dell OpenManage Server Application. I would like to know which is the lastest version for the r510 running on windows.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
1
April 15th, 2016 18:00
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=0P26M&fileId=3498563295&osCode=WS8R2&productCode=poweredge-r510&languageCode=en&categoryId=SM
umihen
14 Posts
0
April 18th, 2016 16:00
what about firmware?
umihen
14 Posts
0
April 19th, 2016 12:00
what if the drive was not put in the offline state before removing?
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
April 19th, 2016 16:00
Best practices call for the drive to be put offline before removing, but it is not necessary ... think of a real-world drive failure - it won't put it offline before it dies.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
April 21st, 2016 07:00
Forcing the drive offline isn't a requirement as TheFlash1932 had stated, unless the drive is flagged as a Predicted Failure, which you would force the drive offline prior to replacing to keep from transfer bad blocks across the Virtual Disk.
umihen
14 Posts
0
April 21st, 2016 10:00
would the reason the drives failed be because they weren't dell certified but the same hard drive part number and model I copied off of omsa.
umihen
14 Posts
0
April 21st, 2016 11:00
The perc h700 firmware version is 12.10.7-0001.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
April 21st, 2016 11:00
Thank you. That is the most current version. Where the drives ever functional in the server, or were they just added and showing failed?
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
April 21st, 2016 11:00
The drives wouldn't show as failed if they were only seen as non-certified, they would likely be displayed as Unknown. Now if the controller is up to date on firmware then a non certified drive wouldn't be the issue. What is the controllers firmware version at currently?
Also, was this drive working before, or has it never worked in this server before?
umihen
14 Posts
0
April 21st, 2016 11:00
SAS-Drive_Firmware_C1MY4_WN32_KS6B_A06.EXE do I need to do this to the on the hard drive so it works with the perc h700
umihen
14 Posts
0
April 21st, 2016 12:00
current drive
ID 1:0:6
Status Critical
Name Physical Disk 1:0:6
State Failed
Power Status Spun Up
Bus Protocol SAS
Media HDD
Revision XRMA
T10 PI Capable No
Certified No
Capacity 0.00GB
Used RAID Disk Space 0.00GB
Available RAID Disk Space 0.00GB
Hot Spare No
Vendor ID SEAGATE
Product ID ST32000444SS
Serial No. 9WM6PNTV
Part Number Not Available
Negotiated Speed Not Available
Capable Speed Not Available
Sector Size 512B
Manufacture Day Not Available
Manufacture Week Not Available
Manufacture Year Not Available
SAS Address 5000C500348C260D
umihen
14 Posts
0
April 21st, 2016 12:00
old drive
ID 1:0:7
Status Non-Critical
Name Physical Disk 1:0:7
State Online
Power Status Spun Up
Bus Protocol SAS
Media HDD
Revision 0005
T10 PI Capable No
Certified No
Capacity 1,862.50GB
Used RAID Disk Space 1,862.50GB
Available RAID Disk Space 0.00GB
Hot Spare No
Vendor ID SEAGATE
Product ID ST32000444SS
Serial No. 9WM0PT5C
Part Number Not Available
Negotiated Speed 6.00 Gbps
Capable Speed 6.00 Gbps
Sector Size 512B
Manufacture Day Not Available
Manufacture Week Not Available
Manufacture Year Not Available
SAS Address 5000C50020ECA7DD