Unsolved
This post is more than 5 years old
13 Posts
0
61689
Emulex OneConnect OCe14102-UX-D new windows drivers - system log spam
Hello. I have recently started doing some tests with this card on windows (2012 R2). After updating to latest FW/drivers from dell, system log is spammed constantly with messages like this:
"Emulex OneConnect OCe14102-UX-D 2-port PCIe 10GbE CNA #3 : IOCTL to firmware has failed. The last 5 words in payload indicate opcode, status, add.status, domain & subsys"
Can someone suggest where to look for the causes/fix?
Tinkas
4 Posts
0
October 23rd, 2015 09:00
Any updates on it? We have same problem.
Marian Vulpe
7 Posts
0
May 5th, 2016 05:00
Same exact error on a Dell M630 blade as well:
"Emulex OneConnect OCm14102-U4-D 2-port 10GbE bNDC CNA #2 : IOCTL to firmware has failed. The last 5 words in payload indicate opcode, status, add.status, domain & subsys"
Endless events in Event Viewer.
spgsitsupport
42 Posts
0
January 8th, 2019 12:00
Very old thread, but got the same with
Emulex OneConnect OCm14104B-N1-D 4-port 10GbE rNDC NIC
on Server 2016 with latest 11.xx drivers
There is HP KB about it
But that was rather brutal, I run it on one adapter
C:\Program Files\Broadcom\AutoPilot Installer\NIC\Drivers\NDIS\x64\Win2016>occfg.exe -!! -a NIC1 -s "MacLearnEnable=0"
OneConnect Network Config (11.2.1153.13)
Copyright 2009-2016 Broadcom. All rights reserved.
Emulex OneConnect OCm14104B-N1-D 4-port 10GbE rNDC NIC #4 (NIC1)
Enable
Emulex OneConnect OCm14104B-N1-D 4-port 10GbE rNDC NIC #4 (NIC1)
Disable
at which point it disabled this adapter & kind of hanged there & nothing could bring it back!
Tried with switches -f -+
Nothing. Could not get this adapter enabled again.
HyperV went mad & had to power cycle the server to get it back
I do not understand where the Disable comes from?!
spgsitsupport
42 Posts
0
January 10th, 2019 22:00
Anybody?
spgsitsupport
42 Posts
0
February 15th, 2019 09:00
No matter what drivers are used (latest are) brcm-lnvgy_dd_nic_18b-12.0.1115.0-4_windows_x86-64
Still Event log littered with this Info