This post is more than 5 years old
2 Posts
0
5652
Installing DRAC4i on PE2850
Hello,
I ordered a DRAC 4i card for my PE 2850 on eBay and finally received it in the mail this week. I was curious as to where it actually gets installed on the motherboard as I can't find the proper connection, or how the RJ45 connection would seat in the back of the machine. I assume the 4i cards install on the PE2850? I couldn't find a hardware installation reference anywhere on google so thought I'd post here.
Cheers'
GnarlyN
theflash1932
9 Legend
9 Legend
•
16.3K Posts
1
May 20th, 2012 16:00
Next to the power supplies flat onto the motherboard on the back edge. There should be a plastic cover/plug/placeholder on the chassis where the RJ45 port goes - it needs to be removed. You will probably also need to remove the rear fans to fully access the DRAC slot.
RAC_CONN:
<ADMIN NOTE: Broken link has been removed from this post by Dell>
Installation Instructions:
http://support.dell.com/support/edocs/systems/pe2850/multlang/RAC/F6588A00.pdf
GnarlyN
2 Posts
0
May 20th, 2012 19:00
Thanks very much. These were the documents I was seeking.