PowerEdge Hardware General
Posts
This post is more than 5 years old
Solved!
Go to Solution13 Posts
0
53772
November 16th, 2013 03:00
Lifecycle Controller Failed
When I turn on the system it says LifeCycle Controller firmware volume failed? How do I repair it?
Responses(1)
No Events found!
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
November 16th, 2013 12:00
Hello boltjosh
Download the LCC repair package from this page. It is the .usc file:
http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/poweredge-t420?driverId=T3YKC&osCode=WS8R2&fileId=3214207687&languageCode=en&categoryId=SV
You will then need connect to your iDRAC's web browser via the iDRAC IP address. In the left pane navigate to iDRAC Settings>Update and Rollback. Browse to the .usc file that you downloaded to your computer and select the upload option. After the upload completes you should have the option to install and reboot.
Thanks