This post is more than 5 years old
13 Posts
0
53890
November 16th, 2013 03:00
Lifecycle Controller Failed
When I turn on the system it says LifeCycle Controller firmware volume failed? How do I repair it?
No Events found!
This post is more than 5 years old
13 Posts
0
53890
November 16th, 2013 03:00
When I turn on the system it says LifeCycle Controller firmware volume failed? How do I repair it?
Top
Daniel My
12 Elder
•
6.2K Posts
0
November 16th, 2013 12:00
Hello boltjosh
Download the LCC repair package from this page. It is the .usc file:
http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/poweredge-t420?driverId=T3YKC&osCode=WS8R2&fileId=3214207687&languageCode=en&categoryId=SV
You will then need connect to your iDRAC's web browser via the iDRAC IP address. In the left pane navigate to iDRAC Settings>Update and Rollback. Browse to the .usc file that you downloaded to your computer and select the upload option. After the upload completes you should have the option to install and reboot.
Thanks