PCIe card not detected on R210 II

Hello,

I have a R210 II server, with PCIe Riser (Ref Y628N) and quad nic PCIe card Intel Gigabit ET Quad Port Adapter, Gigabit Ethernet NIC, PCIe x4 (Ref 0H092P)

Bios don't detect the card and differents OS (freebsd, linux) tested also don't detect nothing.

Card is in the compatibility list : http://www.dell.com/downloads/global/products/pedge/spc_r210_II_new.pdf

Same unsolved problem : https://www.dell.com/community/PowerEdge-General-HW/PowerEdge-R210-II-Quad-Port-PCI-E-NIC/m-p/4626000

See lspci command under linux :

yannick@yannick-PowerEdge-R210-II ~ $ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller (rev 09)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
02:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)
yannick@yannick-PowerEdge-R210-II ~ $

I can see led light when I plug RJ45, so card is well powered.

Cards have been tested by vendor before delivery.

Nothing in Bios to activate PCIe.

So, how can I activate this PCIe card under R210 II server ? What must i do ?

Thank you,