Unsolved
This post is more than 5 years old
2 Posts
0
496103
PowerEdge R710 E171F PCIE Fatal Error on bus 3 device 0 function 0 error
Hi,
I've have PowerEdge R710 server up and running with Windows Server 2008 for a year now. It boots up with E171F PCIE fatal error on bus 3 device 0 function 0 errors this morning.
Can anyone help resolve this?
Thank you.
Cathy2012
2 Posts
0
May 7th, 2012 08:00
Thank you.
DELL-Geoff P
990 Posts
0
May 7th, 2012 08:00
Good morning.
Power down the server, remove the power cord, and hold the power button in to drain the remaining power off the board. Open the server and reseat the PCIe expansion cards and risers. Then power the server back up. If the error remains, go through the same process, this time, leave the RAID controller out and then power the server back up.
For further troubleshooting information, here is a link for a pdf: support.dell.com/.../HOM.pdf
Regards,
Alex_R410
1 Message
0
October 22nd, 2019 12:00
Hi,
I have installed windows 10 in a Dell r410 and a gpu into the pcie 16x.
Now i cannot see any information during the post until the os is uploaded.
I don't understand why cannot see anything during the post (black screen) but only windows 10
Thanks in advance
Best regards