Unsolved
This post is more than 5 years old
6 Posts
0
14924
Poweredge 1600SC and Drac III
I would like to know if the DRAC III card will work in a Poweredge 1600SC? I do not mean whether it is supported by Dell to work in the 1600SC. I am asking whether I could practically use it in a 1600SC.
Thanks!
Vladik
DELL-GaryS
777 Posts
0
October 10th, 2003 13:00
8N289 DRACIII/XT Card(ESM4)
is supported and works in the PE1600, and it will work in the PE1600SC as well.
DELL-GaryS
Chuky
6 Posts
0
October 10th, 2003 14:00
Wrong answer. Please read question again.
Thank You
Vladik
DELL-GaryS
777 Posts
0
October 10th, 2003 15:00
Having reread the question several times, I fail to understand what is wrong about my answer, this is the only DRAC III card that works in the PE1600SC. Please illuminate what you are wanting.
DELL-GaryS
Chuky
6 Posts
0
October 10th, 2003 16:00
The question is: Will the DRAC III work in the PE1600SC? The question is not WHAT works in the PE1600SC.
Thank You,
Vladik
DELL-GaryS
777 Posts
0
October 10th, 2003 16:00
What I posted is a PCI DRAC III card, it is installed in PCI 6 on the PE1600/PE1600SC.
Perhaps you could post a P/N or board description on the DRAC III that you want to know about? or what server you are moving it from would help as well.
DELL-GaryS
Chuky
6 Posts
0
October 10th, 2003 16:00
From what I understand, there is a DRAC III card and a DRAC III/XT card. The Drac III card was not designed to work in the PE1600SC, so my question is whether it will still work in a PE1600SC even though it was not designed to work in it?
Thanks
Rocky-Raccoon
3 Posts
0
November 14th, 2003 03:00
Hello,
Where is the DRAC III/XT listed on your web site?
What is the link?
What is the part number?
How much is it?
I want to purchase this card.
Thanks,
RR
DELL-GaryS
777 Posts
0
November 14th, 2003 13:00
Hi Rocky,
As a spare part you can call in (800-357-3355) and buy the P/N I posted above, for new parts you can call in (800-456-3355) and buy SKU# 313-1840. I could not find it offered on the web.
I am not allowed to quote prices. but if you go to http://configure.us.dell.com/dellstore/config.aspx?c=us&cs=555&l=en&oc=PE650PAD&s=biz
and look at the DRACIII/XT option that will give you an idea of the cost.
DELL-GaryS
Rocky-Raccoon
3 Posts
0
November 15th, 2003 04:00
Hey Gary,
Thanks for the informative post!
Best regards,
RR