R620 network update failes

Hello

Install 18.0.17 instead. It resolves the issue you are experiencing.

- Fixed problem with firmware update failures that occurred with v18.0.16 on configurations including multiple Intel(R) adapters

Thanks

Thanks, will try it tommorrow :-)

/Jesper

This failed too, and i remember that i have tryed this update before.

Do you have any furtere advise....???

/Jesper

Do you have any furtere advise....???

Make sure that the iDRAC/Lifecycle Controller job queue is empty and drain flea power on the system to make sure there are no updates pending in memory. After you have cleared any pending updates try again. If you still cannot perform updates then you will need to remove one of the NICs and update them one at a time.

Thanks

I have how tryed to removed the 2P Card, and trying to update the Daughter Card, and it fails Again.

It seems that the daughter Card is made of 2 Cards, ind the update menu, it is 2 Cards that need update.....???

Also i cant clear the job queue, have tryed reset, tryed the JID_CLEARALL_FÓRCE, but i cant seem to clear the job queue.

racadm racresetcfg

racadm -r ip adresse -u username -p Password jobqueue delete -i JID_CLEARALL_FORCE