This post is more than 5 years old
30 Posts
0
30198
Unable to load windows sbs 2008 in PE T100
Hi
I fixed a new 500 GB sata hard disk drive and when I try to load windows sbs 2008 , during the finish of the installation ,I receive the error below
Windows Setup could not configure Windows on this computer’s hardware”
Please help me to solve this issue
Thanks & Regards
S.Swaminathan
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
1
March 23rd, 2012 16:00
What is the model of hard drive?
ThanjaiSwami
30 Posts
0
March 22nd, 2012 02:00
There is only two options in the BIOS one is ATA ; second one is OFF
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
March 22nd, 2012 02:00
Try changing the sata setting in bios from ahci to ata mode.
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
March 22nd, 2012 10:00
Google the error message, there are some microsoft kb's about this and other pages. Too many to link to here
ThanjaiSwami
30 Posts
0
March 23rd, 2012 00:00
Hi
I installed sbs 2008 sp2 in SEAGATE 80 GB and completed successfully.Then I cloned the same with 500 GB SEAGATE and fixed . SBS 2008 starts in the normal mode and restarts automatically.I disabled the automatic restart on failure and got this message STOP: C00002e2 Directory Services could not start because of the following error:
A device attached to the system is not functioning
Can anybody kindly help please?
( You can check the issue which is going on unsolved at social.technet.microsoft.com/.../aa1bc4b0-943e-4ada-8de1-e03161c8fc2c)
I am posting this for Dell also so that I can get help from somebody
Thanks & Regards S.Swaminathan Live & let others live!!!
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
March 23rd, 2012 07:00
Download the diags program from here:www.dell.com/.../DriverDetails
Run it on a desktop, it will give the option to create a bootable cd image, boot USB stick etc. Boot the T100 from the media and select 'Express tests'. This will check the hardware. Also you could run the MPmemory tests as well.
ThanjaiSwami
30 Posts
0
March 23rd, 2012 11:00
I have already done this tests no errors.What is the problem existing in this model is no support for changing the sata setting to ahci & ata i.e. swapping of this setting.
Windows 2008 R2 is getting installed in this server properly with the same hdd I am using & also windows sbs 2008 sp2 is getting installed properly in 80 GB SATA SEAGATE HDD
Only problem is this hdd for sbs 2008 sp2.
How to solve?
ThanjaiSwami
30 Posts
0
March 24th, 2012 03:00
ST500DM002 is the model of the hard disk drive
ThanjaiSwami
30 Posts
0
March 24th, 2012 06:00
The cloning process completed succesfully and fixed the 500 GB .After starting with 500 GB, the server starts and the windows sbs 2008 screen comes up, restarts automatically.I disabled the automatic restart on failure and got this message STOP: C00002e2 Directory Services could not start because of the following error:
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
March 24th, 2012 06:00
Just thinking out loud. The 80gb disk was probably 512byte sectors, the 500gb is advanced format 4k sectors. Wonder if the cloning process actually completed succesfully.
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
March 24th, 2012 07:00
try stting system date in the bios back a couple of weeks.
ThanjaiSwami
30 Posts
0
March 24th, 2012 07:00
The cloning process completed succesfully and fixed the 500 GB .After starting with 500 GB, the server starts and the windows sbs 2008 screen comes up, restarts automatically.I disabled the automatic restart on failure and got this message STOP: C00002e2 Directory Services could not start because of the following error:
A device attached to the system is not functioning
If cloning not successful, then how 500 GB boots into first ...................
I think there is some problem in 512 emulation for 4k sectors. which has to be solved out!
Thanks & Regards
S.Swaminathan
ThanjaiSwami
30 Posts
0
March 24th, 2012 14:00
Now almost it came to an end of the story.I fixed a SATA 80 GB and loaded the sbs 2008 and put this 500 GB as the slave hdd to it.
I cannot hold the server for troubleshooting and forced to fix the issue in this way instead of searching for a solution taking time.
Anyway thank you for your valuable help
N.B: You asked me to set the bios date two weeks back.How it will lead to a successful installation? what is the concept behind the date behind two weeks?
Regards
S.Swaminathan
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
March 24th, 2012 14:00
I was googling the error message and came across a post about SBS where the hardware was fine but getting the error. The guy finally managed to track it to the AD database and a mis-match in the tombstones. Setting the clock back matched the system to the database. So it was a random thought that would be easy to try.
ThanjaiSwami
30 Posts
0
March 27th, 2012 03:00
Hi
But my issue is different ; I am not be able to install sbs 2008 in 500 GB advanced format drive in DELL POWEREDGE T100 where the bios have no option regarding SATA & AHCI change