now i installed the newest 64bit drivers on win7-64, but it has the same exact issue - r9 m360 is just disabled under device manager, because 'it reported problems', and windows update also suggests w5130m drivers again, lol... so what is going on with this and is it like somekind of switchable graphics and how do i switch them then?
well, now it actually installed w5130m from the 'enterprise' pack(64), but hwinfo said that it's r9 m360... so maybe i try the same pack with 32bit then... (i used the web installer on 64 bit first, but that didn't work then)
and maybe it switches the cards automatically then, because switching all profiles to "perfomance" did not switch the other Gpu on at all... and the discreet one dissapeared from the 'cpu-z' hwinfo app after it found the correct drivers to install for it...
well... now i managed to get it working, but it was probably the actual w5130m v18(enterprise) drivers that was like 273mb or smth. but both 32 and 64 still have some other drivers missing(maybe even same amount), so i probably have to figure those out now lol
i installed the thermal and fall sensor via service tag page, but i already got the smartcard driver from a standalone pack or smth(probably "Dell USB Smartcard Keyboard Driver"), so does that Vault2 thing include the Broadcom stuff also, because i don't want to install anything extra at all
well, the broadcom stuff probably is the actual control vault thing, but what is it in the first place and would it be possible to get 32bit win7 drivers also for it lol... and for the wifi radio switch too...
the only way to correctly install w1530m drivers is to install the hd530 drivers via windows update first and only then u can add the correct w1x00 drivers, not the incorrect m360 ones... and this only works on both, 32 and 64bit win7... win10 only downloads all main drivers itself and you can't even stop or cancel it in any way at all...
jenny5
40 Posts
0
November 20th, 2020 02:00
now i installed the newest 64bit drivers on win7-64, but it has the same exact issue - r9 m360 is just disabled under device manager, because 'it reported problems', and windows update also suggests w5130m drivers again, lol... so what is going on with this and is it like somekind of switchable graphics and how do i switch them then?
U2CAMEB4ME
4 Operator
•
6.2K Posts
0
November 20th, 2020 03:00
Welcome to the Dell Community @jenny5
What is the " Device ID " of the device that is disabled???
https://www.wikihow.com/Find-Hardware-ID
Best regards,
U2
jenny5
40 Posts
0
November 20th, 2020 06:00
well, now it actually installed w5130m from the 'enterprise' pack(64), but hwinfo said that it's r9 m360... so maybe i try the same pack with 32bit then... (i used the web installer on 64 bit first, but that didn't work then)
and maybe it switches the cards automatically then, because switching all profiles to "perfomance" did not switch the other Gpu on at all... and the discreet one dissapeared from the 'cpu-z' hwinfo app after it found the correct drivers to install for it...
omg... the 624mb 'enterprise' pack probably was for r9, but it's only 64bit, so it probably won't work on 32... but why was the name changed to w5130m then lol...
https://www.amd.com/en/support/graphics/amd-radeon-r9-series/amd-radeon-r9-300-series/amd-radeon-r9-m360
jenny5
40 Posts
0
November 20th, 2020 12:00
well... now i managed to get it working, but it was probably the actual w5130m v18(enterprise) drivers that was like 273mb or smth.
but both 32 and 64 still have some other drivers missing(maybe even same amount), so i probably have to figure those out now lol
jenny5
40 Posts
0
November 24th, 2020 04:00
well... where could i get these from and why aren't they on dell website then:
USB\VID_0A5C&PID_5832&MI_00 (Broadcom Ush)
PCI\VEN_8086&DEV_1903&SUBSYS_06E01028
PCI\VEN_8086&DEV_A13A&SUBSYS_06E01028
ACPI\INT3400
ACPI\SMO8810
jenny5
40 Posts
0
November 24th, 2020 05:00
ok, i managed to decode them to these:
(Broadcom Ush)
Intel Dynamic Platform and Thermal Framework
Intel Management Engine Components Installer
Intel Dynamic Platform and Thermal Framework
STMicroelectronics Free Fall Data Protection Driver
but is the Vaul2 thing Broadcom then and iME is kinda backdoor and should be just disabled in device manager?
jenny5
40 Posts
0
November 24th, 2020 05:00
i installed the thermal and fall sensor via service tag page, but i already got the smartcard driver from a standalone pack or smth(probably "Dell USB Smartcard Keyboard Driver"), so does that Vault2 thing include the Broadcom stuff also, because i don't want to install anything extra at all
U2CAMEB4ME
4 Operator
•
6.2K Posts
0
November 24th, 2020 05:00
@jenny5
Download and install these.
Reboot when requested to do so.
Dell ControlVault2 Driver and Firmware:
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=n23kc&oscode=wt64a&productcode=precision-m3510-workstation
Intel Dynamic Platform and Thermal Framework::
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=nwwr5&oscode=wt64a&productcode=precision-m3510-workstation
Dell Free Fall Data Protection Application:
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=yy3nc&oscode=wt64a&productcode=precision-m3510-workstation
Regards,
U2
NOTE:
Your Precision 3510 Driver Support Page here:
https://www.dell.com/support/home/en-us/product-support/product/precision-m3510-workstation/drivers
U2CAMEB4ME
4 Operator
•
6.2K Posts
0
November 24th, 2020 05:00
@jenny5
Did you install the drivers I posted???
Regards,
U2
U2CAMEB4ME
4 Operator
•
6.2K Posts
0
November 24th, 2020 06:00
@jenny5
Do you have a fingerprint reader???
This package contains the Dell ControlVault, Fingerprint, Smartcard, and Near-field communication (NFC) drivers and firmware.
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=n23kc&oscode=wt64a&productcode=precision-m3510-workstation
Regards,
U2
jenny5
40 Posts
0
November 24th, 2020 08:00
no finger
jenny5
40 Posts
0
November 30th, 2020 08:00
well, the broadcom stuff probably is the actual control vault thing, but what is it in the first place and would it be possible to get 32bit win7 drivers also for it lol... and for the wifi radio switch too...
the only way to correctly install w1530m drivers is to install the hd530 drivers via windows update first and only then u can add the correct w1x00 drivers, not the incorrect m360 ones... and this only works on both, 32 and 64bit win7... win10 only downloads all main drivers itself and you can't even stop or cancel it in any way at all...