Unsolved
This post is more than 5 years old
6 Posts
0
4379
Printing small 3.5 inch by 8.5 inch paper landscape on a Dell 2350dn
Printing portrait is very slow because of the narrowness of the ducument. I would like to turn the 8.5 side of the document the full length of the tray and print.
Are there andy attachments for this printer which will enable this to take place.
Thanks,
Paducah
paducah
6 Posts
0
August 6th, 2012 22:00
Printing portrait is very slow because of the narrowness of the ducument. I would like to turn the 8.5 side of the document the full length of the tray and print.
Are there andy attachments for this printer which will enable this to take place.
Thanks,
Paducah
Printster
117 Posts
0
August 8th, 2012 11:00
Unfortunately there is not. The paper has to have a minimum height and width to feed properly:
Minimum feed size is 76.2 x 127 mm (3.9 x 4.9 in.)
If you do not meet that size then it will basically not be large enough to hand off from one set of rollers to the next and will get jammed because there is nothing to propel it through the unit.
paducah
6 Posts
0
August 8th, 2012 16:00
Thank you.
Paducah