ProSphere

Last reply by 04-26-2015 Unsolved
Start a Discussion
MOD
MOD
5009

LUN IOPS

hi there ..

Does anybody how to set up Prosphere for monitoing LUN IOPS ?

Then can Mail alert or some kind of alert function can be set limit % of IOPS ?

thanks

aya

Replies (3)
4 Beryllium
3719

I don't think you'll be able to accomplish this easily.  Prosphere can generate only a limited set of performance alerts.  Take a look at the Admin Guide and the section on setting Performance Thresholds (page 49 onward).

For a VMAX, if you have an SPA alert specified for a given LUN, SPA will issue the alert, then ProSphere can relay it (email or SNMP).  I have several SPA alerts set, and ProSphere relays them nicely.

For a Clariion or VNX, it's a little bit trickier.  You'll need to get Unisphere or Navisphere to generate the alert, then ProSphere can relay it as well. 

Let us know if that helps!

Karl

3719

hi Karl ..

thanks for the advise .. I will check with customer about corboration with Unisphere analyzer for this ..

thanks !

Aya


3719

Hi Ayas,

Try using the Unisphere Central for a change. it's a very good tool and you can get all the relevant performance data that a storage admin needs and that too with upto 2 years( 1 yrs is default) of history information.

Check our from the download section. it's a vApp, so it's very easy to deploy and much easier than the complexity of prosphere. Trust me on that( I have already tried all versions of Prosphere from 1.4 to 2.0).

Latest Solutions
Top Contributor