Unsolved
This post is more than 5 years old
53 Posts
0
1241
vRPA (Classic) Configuration with Unity
Hi Team,
I have configured vRPA (Classic) with unity (iSCSI). I have Received splitter down errors on both site vRPAs. Please advise.
Unity has 10G dual ports (LC) I/O Module (Port 0, Port1) and I have registered the vRPA with four ports on each site.
vRPA classic version 5.1
Regards,
MAwais
forshr
1.1K Posts
1
January 4th, 2018 13:00
Have you tried using higher ports. I'm concerned that the ports that you have used, specifically port 0, may be the default array based replication port.
Regards,
Rich
MAwais
53 Posts
0
January 4th, 2018 13:00
Hi Rich,
Thank you so much for your output, I have attached only one 10G dual ports I/O module and I am using both ports of each SP.
This error automatically disappear.
so what do you suggest should I use the port one (I/O Module Port 1) of I/O module instead of both for each SP.
Regards.
MAwais
forshr
1.1K Posts
0
January 5th, 2018 01:00
So port 0 is still in use and the error has disappeared?
MAwais
53 Posts
0
January 5th, 2018 07:00
yes, it's using both Ports (Port 0 and Port 1) of I/O Module 0 but sometimes error on PR site cluster and sometimes on DR site cluster and automatically appeared and disappeared.