Storage, Drives & Media

Last reply by 11-30-2021 Solved
Start a Discussion
2 Bronze
2 Bronze

error code 2000-0151

Hi I am a Dell user. I have 1564 Inspiron, right now not in warranty. Lately I  faced blue screen of death, when restarted, Dell logo appears and later a blank screen! On restarting and pressing F12, with the Pre boot system assessment, I discovered its error code 2000-0151.

I do face a cracking noise from the disk. Any possible solutions??? 

Replies (43)
2 Bronze
2 Bronze

As I wrote in the past in this thread (page number 1) search for kappaduei post, you can put the hard drive in the trash and buy a new one.

You can retreive your data only in a white room, in a special data recovery lab and maybe pay about 500 to 1000 euros

Ciao

Marco

Dell Technologies

Hi sathyaprakash,

I understand technical issues can be confusing at times; I appreciate the steps you have tried.

If you have tried a different hard drive on the same computer and if it is not getting detected in device manager, then problem is with the hard drive connection on the motherboard.

I assume that you have a dual hard drive in the computer and you are trying to back up the data, for fixing the “cyclic redundancy error" please refer this link: http://www.techbuzz.in/how-to-solve-cyclic-redundancy-check-error-problem.php

Note: It is a third party link; it may or may not work on all systems.

Please check and reply.

2 Bronze
2 Bronze

Hi Nikhil,

The software which was suggested by you is paid version. hence i did not tried.

Thanks for your suggestion, i felt happy at least somebody is responding to my posting.

I have tried with hiren tool but no luck. I have connected many other flash/HDD(external) drive every thing is working in the laptop which was experimenting.

FYI, I am returning my hard disk to Dell tomorrow evening. Finally i am unlucky to get  my data.

Thanks & Regards,

Sathya Prakash.

2 Bronze
2 Bronze

Hello guys,

I have a problem with my Dell! Help me please!

I did the diagnostic test, and everything is OK except for the Hard drive 0.

The error is: error code 2000-0151

                       validation 41260 / Msg Hard Drive 0 - S/N WD-WXD1EA1NNJW4, incorrect status = 3E

Can you please reply ASAP because I'm working on it.

I need a solution rather than replacing the hard drive because I'm a student in Norway and I can't afford a new one!

Thank you in advance!

9 Rhodium

lamis adel

You could try removing and reinstalling the Hard Drive and see if it makes a difference.

But basically, the only solution for a failed hard drive, is to replace it.

Bev.

 


If my answer was helpful, please click: Kudos
Forum Member since 2001
I am not employed by Dell

2 Bronze
2 Bronze

I am having same problem, however this is the second drive I have replaced in this system.  Is there possibly something wrong with controller thats killing these drives?

9 Rhodium

I am having same problem, however this is the second drive I have replaced in this system.  Is there possibly something wrong with controller thats killing these drives?

 Getch394

I doubt it.

Hard drives fail all the time, I've new hard drives fail in less than 30 days, hence the reason for warranties.

What brand of hard drive is it?

Bev.

 

 


If my answer was helpful, please click: Kudos
Forum Member since 2001
I am not employed by Dell

Community Accepted Solution
2 Bronze
2 Bronze

Hi,

I got the same issue, i appreciate if you can tell steps how can I recover my data against Error Code:  2000-0151.

9 Rhodium

mhassan88

 One of the easier methods recovering the files and folders from a failed system is to remove the hard drive and use a USB 2.0, SATA, adaptor similar to this

http://www.newegg.com/Product/Product.asp?Item=N82E16812156102

Then connect the hard drive to working computer and see if you can transfer the files and folders.

If this fails to work, you would need the services of a Data Recovery Company, to recover the files and this can be very expensive.

Bev.

 


If my answer was helpful, please click: Kudos
Forum Member since 2001
I am not employed by Dell

Dell Technologies

Hi mhassan88,

May I know the system model so that I can help you better?

We need to reseat the hard drive and rerun the diagnostics on the hard drive.

I would recommend you to run diagnostics on the Hard drive.

Restart the computer and press F12 to enter the Boot Menu.

  • When the boot device list appears, highlight Diagnostics and press Enter
  • The computer begins to run the Pre-boot System Assessment, a series of embedded diagnostics that perform initial testing on your system board, keyboard, hard drive, and display
  • If the Pre-boot System Assessment completes successfully, you receive the message Booting Dell Diagnostic Utility Partition
  • Press any key to continue
  • Press any key to start the Dell Diagnostics from the Diagnostics utility partition on your hard drive
  • After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want to run -

Express Test: Performs a quick test of devices. The test typically takes 10 to 20 minutes and requires no interaction on your part

Extended Test: Performs a thorough check of devices. The test typically takes 1 hour or more and requires you to answer questions periodically

Custom Test: Tests a specific device. You can customize the tests to be run.

Symptom Tree: Allows you to select tests based on a symptom of the problem you are experiencing

Select Custom test and run the diagnostics on the hard drive.

When you have finished running a test, close the screen to return to the Main Menu screen. To exit the Dell Diagnostics and reboot the computer, close the Main Menu screen

Please make a note of the error message.

Awaiting your response!

Thanks & Regards
Rajesh R
#iworkfordell
To know  more about Dell Product Support, Drivers & Downloads, Order & Dispatch status -> choose your region US ; UK; India. For Dell support videos click Here.
If a post answers your question, please click "
Yes".

Top Contributor
Latest Solutions