This post is more than 5 years old
155 Posts
0
1383
BCV Lib partial error during bcv sync & split
BCV lib error ..while the gold copy split on BCV between local and remote datacenters.
EMC recommended to upgrade the Solutions Enabler to 7.3.2, but still this error exists.
04/25/2012 06:37:40.355 1302626 1 EMC:SYMMIR emcBasicControl ASCdvsready: SYSCALL_NON_ZERO_RC, state_change:
2, symm_dev: 13EA, num_devs: 8, SYMAPI: SYMAPI_C_SYSTEM_CALL_FAILED, Orde r 17 code: 0x01, Order17: Not Done, remote:
1 04/25/2012 06:37:40.384 1302626 1 EMC:SYMMIR SymDgBcvControl() BCV Library Partial error failure with sts: pair #9
An error occurred in sending a Symmetrix System Call.
Try to repeat t he operation 04/25/2012 06:37:40.384 1302626 The BCV 'SPLIT' operation FAILED. 04/25/2012 06:37:40.447 1302626 The BCV control operation FAILED. 04/25/2012 06:40:04.069 897132 1 EMC:SYMMIR SymDgBcvControl() dg: vmware_dgmax, ldev: , SymID: XXXXX, symdev: , bcvdev: , flags: (remote)
Can any one Please help on this.
KD8EWE
155 Posts
0
May 11th, 2012 06:00
Hello All.
I just done a full establish on all the rdf device groups manually, issue resolved.
Thanks
rajshekhar1
30 Posts
0
April 25th, 2012 14:00
Where are you trying to run the commands from, If the gold copy is present in the Remote side are you running these commands from Symcli server on the remote side or from local side.
I remember seeing something similar once but don't remember exactly.
sauravrohilla
859 Posts
0
April 26th, 2012 01:00
It could be due to failed disk, or failed script. Open a ticket with support and give them the debugs.