Highlighted
SKT2
4 Tellurium

Re: SRDF Operations Steps

Jump to solution

better to keep consistency enabled to keep the data at target consistent always. Disable is performed typically when new adding new devices to a group; with code 5874 there is a -cons_exempt  option which can bypass the checking

Reply
ahmad_faraz
2 Bronze

Re: SRDF Operations Steps

Jump to solution

so for 5772 /73 we will require to diable.Is cons_exempt  option not present in 72/73

Reply
Highlighted
sauravrohilla
3 Cadmium

Re: SRDF Operations Steps

Jump to solution

Yes, cons_exempt is available from 5773.xx

regards,

Saurabh

Reply
Highlighted
ahmad_faraz
2 Bronze

Re: SRDF Operations Steps

Jump to solution

so with which command can we use cons_exempt option.If some one can give me the full command that would be appreatiated

Reply
Highlighted
PedalHarder
3 Argentium

Re: SRDF Operations Steps

Jump to solution

The -cons_exempt parameter is used with the symrdf command. Take a look at the symrdf -h output, the parameter description tells you which control operations are valid with -cons_exempt.

Reply
Highlighted
sauravrohilla
3 Cadmium

Re: SRDF Operations Steps

Jump to solution

The -cons_exempt option can be used with the createpair, movepair,

half_movepair, and suspend commands.

regards,

Saurabh

Reply