This post is more than 5 years old
20 Posts
0
758
VMAX FC to FCoE Swap
I was wondering, if we replace a 4 port FC adapter with ports G0/G1/H0/H1 with a 2 port FCoE adapter with ports G0/H0 on the VMAX, will the FCoE adapter have the same WWN as G0/H0 on the current FC adapter?
AranH1
2.2K Posts
0
November 27th, 2013 12:00
Yes it will. The WWN is based on the serial number of the array and the FA port.
christopher_ime
2K Posts
1
November 26th, 2013 19:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Symmetrix Support Forum".
Symmetrix Support Forum