Unsolved
4 Posts
0
230
Dell R610 iDrac Firmware Update Problem
I am sorry to be a pest, but I am stuck. I have 2 Dell R610 servers where I am unable to access iDRAC web GUI due to the ERR_SSL_VERSION_OR_CIPHER_MISMATCH problem. In reading these forums, I have tried to follow the advice given and am stuck. I am able to SSH into the server iDRAC, but cannot use the GUI.
Both servers exhibit the same behavior, so I am assuming it's a problem with me manning the keyboard.
Also, I tried to upgrade them using TFTP, and it seems like they have not upgraded. Below is an extract of what I got from the FW update. I was planning on upgrading from v 1.5 to 1.87 to 1.97 to 2.80 to 2.92 but I have done this several times and RACDUMP shows my old version.
Any help you folks can provide to my poor, wretched and ignorant self is most appreciated.
/admin1-> racadm fwupdate -g -u -a 10.25.0.121
Firmware update completed successfully. The RAC is in the process of
resetting. Your connection will be lost. Please wait up to a minute before starting a new session.
/admin1->
Below is a RACDUMP
EDIT**** I can't seem to post a RACDUMP output here? Any thoughts on how I can do that?
JStuck
4 Posts
0
October 1st, 2022 17:00
===============================================================================
RAC Firmware Build Log
===============================================================================
BLD_TAG=idracfw_bldtag_1_380119_0314_07
BLD_VERSION=1
BLD_NUMBER=38.01.19
BLD_DATE=Thu Jun 3 22:49:28 UTC 2010
BLD_TYPE=idrac
BLD_KERNEL=ZIMAGE
JStuck
4 Posts
0
October 1st, 2022 17:00
RAC Information:
RAC Date/Time = 10/01/2022 22:43:43
Firmware Version = 1.50
Firmware Build = 24
Last Firmware Update = 10/01/2022 21:01:24
Hardware Version = 0.01
MAC Address = 00:21:9b:a6:13:1e
Common settings:
Register DNS RAC Name = 0
DNS RAC Name = iDRAC-SSL-Certificate
Current DNS Domain =
Domain Name from DHCP = 0
System Information:
System Model = PowerEdge R610
System Revision = II
System BIOS Version = 6.6.0
Host Name =
OS Name =
Power Status = ON
===============================================================================
Coredump Information
===============================================================================
Oct 1 18:18:45 (none) kernel: composite_init() Desc: USB Composite Device
Oct 1 18:18:45 (none) kernel: composite_init() Name: g_composite
Oct 1 18:18:45 (none) kernel: composite_init() Version: 20080519
Oct 1 18:18:46 (none) kernel: ci13410_init() Desc: CHIPIDEA ci13410 FS USB Peri pheral Controller
Oct 1 18:18:46 (none) kernel: ci13410_init() Name: g_ci13410_fs
Oct 1 18:18:46 (none) kernel: ci13410_init() Version: 20090511
Oct 1 18:18:46 (none) kernel: ci13410_init() Desc: CHIPIDEA ci13410 HS USB Peri pheral Controller
Oct 1 18:18:46 (none) kernel: ci13410_init() Name: g_ci13410_hs
Oct 1 18:18:46 (none) kernel: ci13410_init() Version: 20090511
Oct 1 18:18:46 (none) kernel: hid_init: Desc: Keyboard/Mouse Function
Oct 1 18:18:46 (none) kernel: hid_init: Name: g_kbdmouse
Oct 1 18:18:46 (none) kernel: hid_init: Version: 20080716
Oct 1 18:18:46 (none) kernel: hid_bind: Using Major Number 238
Oct 1 18:18:46 (none) kernel: hid_bind: using g_ci13410_fs, Keyboard ep1in Mous e ep2in
Oct 1 18:18:46 (none) kernel: usb_composite_register(): bind to driver 'g_kbdmo use' SUCCESSFUL
Oct 1 18:18:47 (none) kernel: msd_init: Desc: Mass Storage Function
Oct 1 18:18:47 (none) kernel: msd_init: Name: g_mass_storage
Oct 1 18:18:47 (none) kernel: msd_init: Version: 20090511
Oct 1 18:18:47 (none) kernel: msd_bind: Using Major Number 237
Oct 1 18:18:47 (none) kernel: usb_composite_register(): bind to driver 'g_mass_ storage' SUCCESSFUL
Oct 1 18:18:47 (none) kernel: g_kbdmouse: full speed config #1 for Keyboard/Mou
DELL-Marco B
Moderator
Moderator
•
3.5K Posts
0
October 3rd, 2022 01:00
Hello,
that seems an issue with SSL certificate. It should be solved with iDRAC update.
It seems to be an issue with TFTP server or connection between idrac and TFTP.
Can you try to connect with a direct laptop on the idrac port?