Unsolved
This post is more than 5 years old
2 Posts
0
4317
Two iDrac6 R815 server show different results on OME discovery and inventory
I have to R815 with iDrac6 Enterprise.
Both of them just update to 1.95 firmware.
In OME 1.1.1, I created a Group, then added the two IP into the same group. So the are using the same protocol/username/password for scanning.
However, one of the machine gives me detailed results. But the second one only give me very brief results.
Why was that? Both are running ESX 4.1 with OMSA.
Where to check?
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
May 15th, 2013 09:00
Sampson Fung,
Generally this is when either OMSA was installed incorrectly, wrong version, or so on. I would lean towards the issue being OMSA based, as they are visible and discovered.
If you could, would you provide a screenshot?
Let me know what you find.
Sampson Fung
2 Posts
0
May 15th, 2013 10:00
Sorry there is a typo is my original post.
"Both are running ESX 4.1 WITHOUT OMSA"