Unsolved
This post is more than 5 years old
1 Message
0
6806
iDrac6 upgrade failed and now racadm won't work
I tried upgrading my iDrac6 to 1.92 through the Web UI.
It uploaded just fine and went through the upgrade but when it reached 100% it came back as failed. Then the firmware reset back down to 1.10.13 (much earlier than the original version I was on).
racadm doesn't work. I cannot upload new firmware because it just sits in a loop and sends ajax post requests asking for firmware versions on that page and never sends a file.
Any suggestions on fixing this?
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
February 24th, 2015 08:00
Hi,
Does racadm racreset work? rebooting the drac may help. Try uploading an earlier version of the firmware and see if it will flash back to that version. It went back to the original firmware for the drac6. What OS is it running? Can you update from the OS?