Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
5031
Unity NAS config with LACP ( GARP Brodcast )
Hello everyone
I have a Question.
Unity 300 config a below Diagram ( Switch A / Left , Switch B / right )
But, During a fail-over test, ( SP A - Service mode / SP-B Active ) Ping is not reached.
Customer's Network Guy said, Unity will not Broadcast GARP ( Gratutious ARP ).
please Advice to me
Thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
December 4th, 2016 19:00
Customer's network environment a can't cross connection.
tsamuel0905
136 Posts
1
December 4th, 2016 19:00
This may help..
https://www.emc.com/collateral/white-papers/h15162-emc-unity-high-availability.pdf
why dedicated path/switch for each SPs? any specific reason?
Rainer_EMC
8.6K Posts
0
December 5th, 2016 05:00
we should send out a gratouitous re-arp
check the switch portfast settings and arp cache on switch and ping host
when still in doubt take a network trace - but here the problem is more likely on the network config than on the Unity in my experience
tsamuel0905
136 Posts
0
December 5th, 2016 19:00
if automatic failback policy is not enabled? because both SPs are not cross connected with the switch in their environment.. just a thought..